Need help?Do you have a question about the BEKA BA328E and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Input | 4/20 mA |
| Operating Temperature | -40 to +70 °C |
| Hazardous Area Certification | ATEX, IECEx |
| Touch Screen | No |
| Protection Rating | IP66 |
Describes the four front panel push-buttons used for control and calibration.
Details ATEX certification for gas atmospheres, including certificate number and conditions.
Specifies zones, gas groups, and temperature ratings for safe installation.
Outlines special conditions for use, particularly for conductive dust atmospheres.
Details the intrinsic safety parameters for the 4/20mA input terminals.
Explains how to connect indicators in series with intrinsically safe 4/20mA current loops.
Step-by-step instructions for mounting the indicator and connecting wiring.
Defines the relationship between input current and indicator display (Std, root, Lin).
Calibrates zero and span using an external calibrated current source.
Calibrates zero and span using the indicator's internal reference.
Sets a four-digit code to access the configuration menu.
Resets indicator and lineariser to their default configurations.
Provides a procedure to diagnose and resolve issues encountered during initial setup.
Guides on diagnosing faults that occur after the instrument has been installed.
Details factory-fitted dual solid-state alarm outputs and their configuration.
Adjusts alarm setpoints and configures direct access from display mode.
To Next Page
