Need help?Do you have a question about the BEKA BA327E and is the answer not in the manual?
General| Protection Class | IP66 |
|---|---|
| Protection Rating | IP66 |
| Display Type | LCD |
| Power Supply | 24V DC |
| Hazardous Area Approval | ATEX, IECEx |
| Backlight | LED |
| Mounting | Panel |
Details on ATEX certification for explosive gas atmospheres, including certificate number and equipment class.
Specifies the hazardous zones, gas groups (A, B, C), and temperature classifications (T5) for safe use.
Procedures for calibrating zero and span using external current source or internal references.
Calibrating the lineariser using an external current source for accurate measurement.
Calibrating the lineariser using the instrument's internal reference without external source.
Procedures for diagnosing and resolving issues encountered during initial setup.
Troubleshooting steps for indicators that fail after initial successful operation.
Comprehensive guide to setting up and using alarm functions: enable, setpoints, hysteresis, delay.
Certification details for installation in combustible dust atmospheres.
Specifies hazardous dust zones (20, 21, 22) and maximum surface temperatures.
Overview of FM and CFM approvals for use in USA and Canada.
Details on FM Class 3610 intrinsic safety approval for Division 1 and 2 locations.
To Next Page
