What to do if the Beko B5T4823RW doesn't turn on or start?
If your Beko Dryer isn't turning on, first ensure the power cord is properly plugged in. Check that the loading door is fully closed. Also, verify that a program is selected and the dryer isn't in pause mode. Finally, make sure the child lock is turned off.
Why are my clothes still damp after using my Beko B5T4823RW?
If clothes are damp after drying in your Beko Dryer, it could be due to using an unsuitable program. Check the care labels and select a program appropriate for the fabric type, or use timed programs. Clogged fibre filters or a blocked condenser can also cause this; clean them. Avoid overloading the dryer and ensure clothes are wrung at a high speed in the washing machine.
Why is the condenser warning icon flashing on my Beko Dryer?
The condenser warning icon flashes on your Beko Dryer because the condenser front might be clogged with fibres. Clean the front side of the condenser. Also, check if the interior and exterior fibre filters are properly inserted and insert them if they are not.
Why is the fibre filter cleaning icon lit on my Beko Dryer?
The fibre filter cleaning icon on your Beko Dryer lights up when the fibre filter (interior and exterior) is unclean or clogged. Wash the filters with warm water and dry them. Also, make sure the interior and exterior filters are correctly inserted.
Why does water drip from the loading door of my Beko Dryer?
Water drips from the loading door of your Beko Dryer because fibres might have gathered on the inner sides of the loading door and the loading door gasket. Clean these surfaces.
Why does my Beko B5T4823RW Dryer take so long to dry?
Your Beko Dryer might be taking too long due to several reasons. The fibre filters could be clogged; try washing them with warm water and drying them. The condenser front might be blocked, so clean it. Ensure the ventilation grills aren't obstructed. Inadequate ventilation in a small room can also cause this; open a door or window. Also, the humidity sensor might need cleaning, the machine might be overloaded, or the washing machine didn't wring the clothes at a high enough speed.
What does it mean when the water tank warning symbol is on my Beko B5T4823RW Dryer?
If the water tank warning symbol is on or flashing on your Beko Dryer, it means the water tank is likely full; empty it. Also, if your dryer is connected to a water drain, check the water discharge hose for any collapses.
What to do if my Beko Dryer program terminated prematurely?
If your Beko Dryer program stops for no reason, ensure the loading door is properly closed. If there was a power outage, press the Start / Pause / Cancel button to restart the program. Also, the water tank may be full, so empty it.
Why have my clothes shrunk in my Beko Dryer?
Clothes may shrink, harden, or spoil in your Beko Dryer if a program not suitable for the laundry type was used. Check the maintenance labels on the clothes and select an appropriate program.
Why does the loading door on my Beko B5T4823RW open by itself?
The loading door on your Beko Dryer opens by itself because it might not be completely closed. Push the loading door until you hear the closing sound.
General| Appliance placement | Freestanding |
|---|---|
| Capacity | 8 kg |
| Drying system | Condenser |
| Energy Efficiency Class | B |
| Number of Programs | 15 |
| Cycle time | 150 minutes |
| Noise Level | 65 dB |
| Heat source | Electric |
| Product colour | White |
| Drying class | B |
| Loading type | Front loading |
| Dimensions (H x W x D) | 846 x 597 x 609 mm |
To Next Page
