EasyManua.ls Logo

Beko B5T4923RW - User Manual

Beko B5T4923RW
40 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
B5T4923RW
Dryer
User Manual
EN
2960313053_EN/ 07-07-21.(10:18)

Table of Contents

Questions and Answers

  • D
    David LynchAug 17, 2025
    What to do if clothes come out damp after drying in my Beko Dryer?
    • P
      pmarshallAug 17, 2025
      If clothes are coming out damp after drying in your Beko Dryer, it could be due to several reasons. You might be using a program not suitable for the laundry type, so check the maintenance labels and select an appropriate program. Clogged fibre filters or a clogged condenser front side can also cause this issue, so wash the filters and clean the condenser. Also, avoid overloading the dryer and ensure that the laundry has been adequately wrung in the washing machine.
  • T
    Thomas ScottAug 20, 2025
    Why won't my Beko Dryer turn on or start a program?
    • G
      Gerald StaffordAug 20, 2025
      If your Beko Dryer isn't turning on or the program won't start, first ensure that the power plug is properly plugged in. Check that the loading door is fully closed. Make sure a program is selected and is not in Pause mode. Also, verify whether the child lock is activated and, if so, deactivate it.
  • T
    Taylor RamirezAug 22, 2025
    What to do if my Beko B5T4923RW program stops for no reason?
    • K
      kathleenwilliamsAug 22, 2025
      If a Beko Dryer program stops unexpectedly, ensure that the loading door is properly closed. If there was a power outage, press the Start / Pause / Cancel button to restart the program. Also, check if the water tank is full and empty it if necessary.
  • A
    amyaliAug 26, 2025
    Why is water dripping from the loading door of my Beko B5T4923RW?
    • J
      Jason RobertsAug 26, 2025
      If water is dripping from the loading door of your Beko Dryer, fibres might have accumulated on the inner sides of the loading door and the loading door gasket. Clean these surfaces to resolve the issue.
  • R
    rickyleeAug 27, 2025
    Why does my Beko Dryer take so long to dry?
    • S
      Stephanie CampbellAug 27, 2025
      Several factors can cause the drying operation to take longer than expected on your Beko Dryer. The fibre filters might be clogged, so try washing them with warm water and drying them. The condenser front side may be clogged, so you should clean it. Ensure that ventilation grills are not blocked and that the room is adequately ventilated. A lime layer on the humidity sensor can also cause this issue, so clean the humidity sensor. Avoid overloading the machine, and ensure laundry is adequately wrung before drying.
  • K
    Katrina RuizAug 30, 2025
    How to turn off the fibre filter cleaning icon on my Beko B5T4923RW?
    • C
      cindystoneAug 30, 2025
      If the fibre filter cleaning icon is lit on your Beko Dryer, it indicates that the fibre filters (both interior and exterior) may be unclean. Wash the filters with warm water and dry them. Ensure the interior and exterior filters are correctly inserted into their designated places.
  • X
    xmendozaSep 1, 2025
    Why is the water tank warning symbol flashing on my Beko Dryer?
    • H
      Heather GilbertSep 1, 2025
      If the water tank warning symbol is on or flashing on your Beko Dryer, it likely means the water tank is full; empty it. If your dryer is connected directly to a water drain, inspect the water discharge hose for any collapses or obstructions.
  • M
    Michelle GibsonSep 4, 2025
    Why have my clothes shrunk, hardened, or spoiled in my Beko B5T4923RW?
    • B
      Becky HansonSep 4, 2025
      Clothes may shrink, harden, or spoil in your Beko Dryer if you're using a program unsuitable for the laundry type. Always check the maintenance labels on your clothes and select a program that is appropriate.
  • C
    Cristina SpearsSep 6, 2025
    What does it mean when the condenser warning icon is flashing on my Beko B5T4923RW Dryer?
    • M
      Melissa JonesSep 6, 2025
      If the condenser warning icon is flashing on your Beko Dryer, the front side of the condenser may be clogged with fibres. Clean the front side of the condenser. Also, ensure that the interior and exterior fibre filters are properly inserted.
  • T
    Tamara MolinaSep 9, 2025
    Why does the loading door of my Beko B5T4923RW Dryer open by itself?
    • B
      beltrangabrielleSep 9, 2025
      If the loading door of your Beko Dryer opens by itself, it might not be completely closed. Push the loading door until you hear the closing sound.

Summary

Safety Instructions

Intended Use

Child and Pet Safety

Guidelines for safe use by children, pets, and vulnerable individuals.

Electrical Safety

Precautions for safe connection, usage, and maintenance of electrical components.

Installing Safety

Requirements and precautions for safe installation of the dryer.

Usage Safety

Rules for safe operation and preventing hazards during use.

Maintenance & Cleaning Safety

Installation

Installation Location

Guidance on selecting a suitable and safe place for dryer setup.

Shipping Safety Group Removal

Water Connection

Preparation

Running the Product

Control Panel Overview

Explanation of buttons, displays, and indicators on the control panel.

Program Symbols

Visual guide to understand the meaning of various program icons.

Machine Preparation

Steps to prepare the dryer and load laundry before starting.

Program Selection & Chart

Details on available programs, their descriptions, and consumption data.

Auxiliary Functions

Explanation of features like Dryness Level, Wrinkle Prevention, and others.

Warning Indicators

Understanding the meaning of different warning lights and messages.

Starting & Cancelling Programs

Procedures for initiating, pausing, changing, and stopping cycles.

Child Lock

End of Program

Special Functions

Maintenance and Cleaning

Filter Cleaning

Sensor Cleaning

Water Tank Maintenance

Condenser Cleaning

Troubleshooting

Common Issues and Solutions

Addresses problems like long drying times, damp clothes, and operational errors.

Electrical Connection

Electrical Requirements

Specifications for the power supply and socket.

Plug Fitting

Beko B5T4923RW Specifications

General IconGeneral
Model NumberB5T4923RW
Appliance placementFreestanding
Drying systemHeat pump
Rated capacity9 kg
Drying classB
Number of Programs15
Noise Level64 dB
Heat sourceElectric
Height846 mm
Product colourWhite
Delay StartYes
Child LockYes
Reversing Tumbling ActionYes
Loading typeFront loading
Drying ProgramsCotton, Synthetics, Wool, Delicates, Jeans, Shirts, Refresh
Display TypeDigital

Related product manuals