EasyManua.ls Logo

Beko B5T43243 - User Manual

Beko B5T43243
71 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
B5T43243
Dryer
User Manual
Secador
Manual do utilizador
EN / PT
2960313448_EN/ 04-07-22.(9:50)

Table of Contents

Questions and Answers

  • C
    Chris SantosAug 17, 2025
    What to do if clothes come out damp after drying in my Beko Dryer?
    • P
      Phillip BrownAug 17, 2025
      If your clothes are damp after drying, several issues could be the cause. First, ensure that you're using a program suitable for the type of laundry you're drying by checking the maintenance labels on the clothes. Also, check the fibre filters and clean them with warm water and dry if they are clogged. The condenser front side may also be clogged and require cleaning. Avoid loading the dryer excessively, and ensure your laundry is adequately wrung before drying by performing a higher speed wringing on the washing machine.
  • K
    Kimberly PalmerAug 20, 2025
    How to clean fibre filter in Beko B5T43243?
    • A
      Alexa JenkinsAug 20, 2025
      The fibre filter cleaning icon lights up when the fibre filter (interior and exterior filter) may be unclean, or a layer may be formed on the fibre filter pores that leads to clogging. To resolve this, wash the filters with warm water and dry them. Also, ensure that the interior and exterior filters are properly inserted into their places.
  • C
    Christine WestAug 23, 2025
    What to do if my Beko B5T43243 Dryer does not turn on?
    • J
      Jesse RyanAug 23, 2025
      If your Beko Dryer doesn't turn on, check these items: 1. Make sure the power cord is plugged in. 2. Ensure that the loading door is properly closed. 3. Verify that a program is set and it is not in Pause position. 4. Check if the child lock is activated and turn it off.
  • A
    Anthony OconnorAug 26, 2025
    Why does water drip from the loading door of my Beko B5T43243?
    • R
      Robert CollinsAug 26, 2025
      If water drips from the loading door, fibres might have gathered on the inner sides of the loading door and the loading door gasket. Clean the inner surfaces of the loading door and the loading door gasket surfaces.
  • E
    Emily VasquezAug 28, 2025
    Why does my Beko B5T43243 take so long to dry?
    • T
      Timothy PerezAug 28, 2025
      Several factors can cause prolonged drying times. The fibre filters might be clogged, so wash them with warm water and dry them. The condenser front side may also be clogged, requiring cleaning. Ensure that the ventilation grills in front of the machine are not blocked and that the room has adequate ventilation. A lime layer on the humidity sensor or excessive laundry load can also extend drying time. Insufficient wringing of the laundry before drying can also cause this issue; try a higher speed wringing on your washing machine.
  • J
    Jessica MartinezAug 31, 2025
    Why does the condenser warning icon flash on my Beko Dryer?
    • C
      Caroline HarrisAug 31, 2025
      The condenser warning icon flashes because the condenser front side may be clogged with fibres. Clean the front side of the condenser. Also, ensure that the interior and exterior filters are properly inserted into their places.
  • D
    Denise RossSep 3, 2025
    Why is the lighting inside my Beko Drying machine not turning on?
    • F
      flopezSep 3, 2025
      Check that the drying machine is turned on using the On/Off button. If it is on, the lamp might be malfunctioning. Contact Authorized Service to replace the lamp.
  • M
    Mariah WilliamsSep 5, 2025
    Why is the water tank warning symbol on my Beko Dryer flashing?
    • D
      Darius LarsonSep 5, 2025
      The water tank warning symbol flashes because the water tank may be full, so you should empty it. Also, if the product is connected directly to the water drain check the water discharge hose, because it might have collapsed.
  • L
    Lynn BuchananSep 8, 2025
    What to do if my Beko B5T43243 Dryer program terminated prematurely?
    • R
      Rhonda HoffmanSep 8, 2025
      If the program on your Beko Dryer terminates prematurely, make sure that the loading door is properly closed. If there was a power outage, press the Start / Pause / Cancel button to restart the program. Also, the water tank may be full, so empty it.
  • M
    Mary JacobsSep 12, 2025
    Why have clothes shrunk in my Beko Dryer?
    • J
      James EricksonSep 12, 2025
      Clothes may shrink, harden, or spoil if a program not suitable for the laundry type was used. Check the maintenance labels on the clothes and select a program suitable for the clothes.

Beko B5T43243 Specifications

General IconGeneral
Appliance placementFreestanding
Noise level64 dB
Energy efficiency classA++
Remaining time indicationYes
Delay StartYes
Child LockYes
Loading typeFront load
Width597 mm
Drying programsMultiple
Number of ProgramsMultiple

Related product manuals