EasyManua.ls Logo

Beko B5T69243 - User Manual

Beko B5T69243
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
B5T69243
Dryer
User Manual
Mašina za sušenje
Priručnik za korisnika
EN / SB
2960313292_EN/ 10-03-22.(15:29)

Table of Contents

Questions and Answers

  • A
    annenewmanAug 14, 2025
    What to do if my Beko B5T69243 Dryer does not turn on?
    • G
      Gregory CastilloAug 14, 2025
      If the Beko Dryer is not turning on or the program won't start, ensure the power cord is plugged in, the loading door is properly closed, a program is set and not paused, and the child lock is turned off.
  • E
    Eric BryantAug 17, 2025
    Why is my Beko B5T69243 Dryer leaking water from the door?
    • K
      Kelly GreeneAug 17, 2025
      If water drips from the loading door of your Beko Dryer, fibres might have gathered on the inner sides of the loading door and the loading door gasket. Clean these surfaces.
  • V
    Victor WilliamsAug 20, 2025
    Why does my Beko Dryer take so long to dry?
    • J
      jacob15Aug 21, 2025
      If your Beko Dryer is taking too long, the fibre filters (interior and exterior) may be clogged. Wash them with warm water and dry. The condenser front side may be clogged, so clean it. Also, check that the ventilation grills in front of the machine are not blocked and that the room is adequately ventilated. A lime layer may have accumulated on the humidity sensor, so clean the humidity sensor. Avoid excessive laundry loads and ensure laundry is adequately wrung before drying.
  • P
    paulawilsonAug 25, 2025
    What to do if clothes come out damp after drying in Beko B5T69243 Dryer?
    • M
      michaelwilliamsAug 25, 2025
      If clothes are damp after drying in your Beko Dryer, it might be due to using an unsuitable program. Check the maintenance labels and select a program suitable for the clothes' type, or use time programs as extra. Also, the fibre filters or condenser may be clogged, so wash the filters and clean the condenser. Avoid overloading the machine and ensure laundry is adequately wrung.
  • O
    Olivia ShahAug 27, 2025
    Why is the water tank warning symbol on my Beko B5T69243?
    • D
      daniel19Aug 28, 2025
      If the water tank warning symbol is on or flashing on your Beko Dryer, the water tank may be full, so empty it. Also, if the product is connected directly to the water drain check the water discharge hose for collapsing.
  • J
    Jessica HarrisAug 31, 2025
    Why does my Beko B5T69243 program stop for no reason?
    • C
      Calvin LunaAug 31, 2025
      If your Beko Dryer program terminated prematurely, ensure that the loading door is properly closed. If there was a power outage, press the Start / Pause / Cancel button to start the program. The water tank may also be full, so empty it.
  • L
    Lee KingSep 3, 2025
    What to do if the Beko B5T69243 Dryer loading door opens by itself?
    • A
      Angela BlanchardSep 3, 2025
      If the loading door of your Beko Dryer opens by itself, push the loading door until the closing sound is heard.
  • J
    James DavisSep 6, 2025
    Why have clothes shrunk in my Beko B5T69243 Dryer?
    • D
      Donna NorrisSep 7, 2025
      If clothes have shrunk, hardened, or spoiled after drying in your Beko Dryer, a program not suitable for the laundry type might have been used. Check the maintenance labels on the clothes and select a suitable program.
  • R
    romandaltonSep 9, 2025
    Why is the light not working in my Beko B5T69243 Dryer?
    • C
      candicegomezSep 10, 2025
      Check that the Beko Drying machine is turned on. If it is on, contact Authorized Service to replace the lamp because the lamp might be malfunctioning.

Beko B5T69243 Specifications

General IconGeneral
BrandBeko
ModelB5T69243
CategoryDryer
LanguageEnglish

Related product manuals