Why won't my Beko B5T68233 Dryer turn on?
If your Beko Dryer isn't turning on or the program won't start, first ensure the power cord is plugged in. Check that the loading door is properly closed. Make sure a program is selected and the dryer isn't in pause mode. Also, verify that the child lock is deactivated.
How to clean fibre filter in Beko Dryer?
If the fibre filter cleaning icon is lit on your Beko Dryer, the fibre filter (interior and exterior) may be unclean, so wash the filters with warm water and dry them. A layer may have formed on the fibre filter pores, leading to clogging, so wash the filters. Also, ensure the interior and exterior filters are correctly inserted.
Why is my Beko Dryer leaking water from the door?
If water is dripping from the loading door of your Beko Dryer, fibres might have gathered on the inner sides of the loading door and the loading door gasket. Clean the inner surfaces of the loading door and the loading door gasket surfaces.
Why is the condenser warning icon flashing on my Beko B5T68233 Dryer?
If the condenser warning icon is flashing on your Beko Dryer, the condenser front side may be clogged with fibres, so clean it. Also, ensure that the interior and exterior fibre filters are properly inserted.
Why does my Beko B5T68233 Dryer take so long to dry?
The Beko Dryer might be taking too long to dry your clothes due to several reasons. The fibre filters (both interior and exterior) may be clogged, so wash them with warm water and dry them. The condenser front side might be clogged, so clean it. Also, ventilation grills in front of the machine may be blocked, so remove any obstruction. Inadequate ventilation in the installation area can also cause this, so open a door or window. A lime layer on the humidity sensor should be cleaned. Avoid overloading the machine and ensure laundry is adequately wrung before drying.
What to do if clothes come out damp from Beko B5T68233?
If your clothes are coming out damp after drying in your Beko Dryer, it could be due to several reasons. You may have used a program not suitable for the laundry type, so check the maintenance labels and select an appropriate program. The fibre filters (interior and exterior) might be clogged, so wash them with warm water and dry them. The condenser front side may be clogged, so clean it. Avoid overloading the dryer and ensure the laundry is adequately wrung in the washing machine.
How to fix water tank warning on Beko Dryer?
If the water tank warning symbol is on or flashing on your Beko Dryer, it means the water tank may be full, so empty it. If the product is connected directly to the water drain, the water discharge hose might have collapsed, so check it.
What to do if Beko B5T68233 program stops suddenly?
If your Beko Dryer program stops unexpectedly, ensure that the loading door is properly closed. If there was a power outage, press the Start / Pause / Cancel button to restart the program. Also, the water tank may be full, so empty it.
Why did my clothes shrink in the Beko Dryer?
If your clothes have shrunk, hardened, or spoiled after drying in your Beko Dryer, it's likely that a program not suitable for the laundry type was used. Check the maintenance labels on the clothes and select a suitable program.
Why is my Beko B5T68233 Dryer beeping?
If you hear an audible warning from your Beko Dryer, the fibre filters may not be inserted, so insert the interior and exterior filters. Alternatively, the filters of the machine may not have been installed, so install the fibre filters (internal and external) or the environmentally-friendly filter to their housing.
General| Appliance placement | Freestanding |
|---|---|
| Loading type | Front load |
| Capacity | 8 kg |
| Drying class | B |
| Number of Programs | 15 |
| Energy efficiency class | B |
| Heat source | Electric |
| Width | 60 cm |
| Height | 85 cm |
| Color | White |
| Drying programs | Delicate, Wool, Quick |
| Type | Condenser |
To Next Page
