What to do if my Beko Dryer clothes come out damp?
If clothes are damp after drying in your Beko dryer, it could be due to using an unsuitable program, clogged fibre filters, a clogged condenser front, overloading the machine, or inadequate wringing. Try selecting a program suitable for the clothes, wash and dry the filters, clean the condenser, reduce the load size, or perform a higher speed wringing in your washing machine.
What to do if my Beko B5T68243W2 does not turn on?
If your Beko dryer isn't turning on, check if the power plug is properly inserted, ensure the loading door is fully closed, verify that a program is selected and not paused, and confirm that the child lock is deactivated.
Why does my Beko Dryer take so long to dry?
Several factors can cause a Beko dryer to take longer than expected: clogged fibre filters (both interior and exterior), a clogged condenser, blocked ventilation grills, inadequate ventilation in the installation area, a lime layer on the humidity sensor, overloading the machine, or insufficiently wrung laundry. To resolve this, try washing and drying the fibre filters, cleaning the condenser front, removing obstructions from the ventilation grills, improving room ventilation, cleaning the humidity sensor, reducing the load size, or performing a higher speed wringing.
Why is the condenser warning icon flashing on my Beko B5T68243W2 Dryer?
The condenser warning icon flashes on your Beko dryer if the condenser front is clogged with fibres or the fibre filters are not inserted. Clean the front side of the condenser. Insert the interior and exterior filters to their places.
Why does the water tank warning symbol keep flashing on my Beko Dryer?
The water tank warning symbol flashes on your Beko dryer because the water tank may be full, or the water discharge hose might have collapsed. Empty the water tank. If the product is connected directly to the water drain check the water discharge hose.
What to do if my Beko B5T68243W2 Dryer program terminated prematurely?
If your Beko dryer program stops unexpectedly, it might be due to the loading door not being completely closed, a power outage, or a full water tank. Make sure that the loading door is properly closed. Press the Start / Pause / Cancel button to start the program. Empty the water tank.
Why do clothes shrink in my Beko B5T68243W2?
Clothes may shrink, harden, or spoil in your Beko dryer if a program unsuitable for the laundry type was used. Check the maintenance labels on the clothes and select a suitable program.
Why is there an audible warning from my Beko B5T68243W2?
An audible warning from your Beko dryer indicates that the fibre filters may not be inserted or the filters of the machine may not have been installed. Insert the interior and exterior filters to their places. Install the fibre filters (internal and external) or the environmentally-friendly filter to their housing.
Why does water drip from the loading door of my Beko B5T68243W2?
Water dripping from the loading door of your Beko dryer may be due to fibres gathered on the inner sides of the loading door and the loading door gasket. Clean the inner surfaces of the loading door and the loading door gasket surfaces.
Why does the loading door of my Beko B5T68243W2 open by itself?
If the loading door of your Beko dryer opens by itself, it might not be completely closed. Push the loading door until the closing sound is heard.
To Next Page
General
