What to do if my Beko Dryer does not turn on?
If the Beko Dryer is not turning on or the program won't start, ensure the power cord is plugged in, the loading door is properly closed, a program is set and not paused, and the child lock is turned off.
Why does my Beko B5T69233 take so long to dry?
If your Beko Dryer is taking too long, the fibre filters (interior and exterior) may be clogged. Wash them with warm water and dry. The condenser front side may be clogged, so clean it. Also, check that the ventilation grills in front of the machine are not blocked and that the room is adequately ventilated. A lime layer may have accumulated on the humidity sensor, so clean the humidity sensor. Avoid excessive laundry loads and ensure laundry is adequately wrung before drying.
What to do if clothes come out damp after drying in Beko B5T69233?
If clothes are damp after drying in your Beko Dryer, it might be due to using an unsuitable program. Check the maintenance labels and select a program suitable for the clothes' type, or use time programs as extra. Also, the fibre filters or condenser may be clogged, so wash the filters and clean the condenser. Avoid overloading the machine and ensure laundry is adequately wrung.
Why is the water tank warning symbol on my Beko B5T69233 Dryer?
If the water tank warning symbol is on or flashing on your Beko Dryer, the water tank may be full, so empty it. Also, if the product is connected directly to the water drain check the water discharge hose for collapsing.
Why does my Beko B5T69233 Dryer program stop for no reason?
If your Beko Dryer program terminated prematurely, ensure that the loading door is properly closed. If there was a power outage, press the Start / Pause / Cancel button to start the program. The water tank may also be full, so empty it.
What to do if the Beko B5T69233 loading door opens by itself?
If the loading door of your Beko Dryer opens by itself, push the loading door until the closing sound is heard.
Why have clothes shrunk in my Beko Dryer?
If clothes have shrunk, hardened, or spoiled after drying in your Beko Dryer, a program not suitable for the laundry type might have been used. Check the maintenance labels on the clothes and select a suitable program.
Why is the light not working in my Beko Dryer?
Check that the Beko Drying machine is turned on. If it is on, contact Authorized Service to replace the lamp because the lamp might be malfunctioning.
Why is my Beko B5T69233 leaking water from the door?
If water drips from the loading door of your Beko Dryer, fibres might have gathered on the inner sides of the loading door and the loading door gasket. Clean these surfaces.
Why is the Wifi icon flashing on my Beko B5T69233?
Follow the instructions to connect your Beko Dryer to the network. Check the device which the product utilize to connect to network. There is no suggested solution for the case, when the product may not be connecting to the network due to proximity.
General| Drum type | Aquawave |
|---|---|
| Door color | Black, White |
| Door hinge | Right |
| Door style | Glass window door |
| Control type | Rotary, Touch |
| Loading type | Front-load |
| Drum material | Stainless steel |
| Drying system | Heat pump |
| Product color | White |
| Built-in display | Yes |
| Appliance placement | Freestanding |
| Wi-Fi controlled | No |
| Heat source | Electric |
| AC input voltage | 230 - 240 V |
| AC input frequency | 50 Hz |
| Energy consumption | - kWh |
| Energy efficiency scale | A+++ to D |
| Annual energy consumption | 259 kWh |
| Cycle time | 209 min |
| Noise level | 64 dB |
| Drying class | B |
| Drum capacity | 9 kg |
| Number of drying programs | 15 |
| Package depth | 630 mm |
| Package width | 650 mm |
| Package height | 885 mm |
| Package weight | 43000 g |
Weight and Dimensions| Depth | 605 mm |
|---|---|
| Width | 598 mm |
| Height | 846 mm |
| Weight | 42000 g |
Product designed for household use only, not for commercial or outdoor use. Avoid freezing conditions.
Guidelines for safe use by children aged 8+ and supervised individuals. Keep young children away from the appliance.
Instructions for safe electrical connection, handling damaged cords, and avoiding hazards like wet hands.
Precautions for moving the product: unplug, drain, handle weight safely, move upright or tilt right.
Ensure proper installation location, check for damage, and maintain ventilation clearances. Allow 12 hours rest.
Guidelines on suitable laundry, items to avoid drying, and proper operation like not stopping mid-cycle.
Safety precautions for cleaning: avoid water, sharp tools, specific cleaning agents. Clean filters regularly.
Contact authorized service for replacement. Bulb not suitable for home lighting; intended for safe laundry loading.
Use distilled/condensed water for steam. Remove stains before steaming. Do not open door during operation.
Proper disposal according to WEEE regulations. Take to collection point. Do not dispose with domestic waste.
Product packaging is made of recyclable materials. Dispose of packaging according to local authorities.
Product development, manufacturing, and sales comply with EU safety rules and directives.
Details on dimensions, capacity, weight, voltage, power input, and model code of the drying machine.
Diagram illustrating the main parts of the drying machine with numbered labels for identification.
List of items included in the product package, with optional items noted as depending on the model.
Select flat, stable surface. Ensure good ventilation and clearances. Avoid doors blocking the loading door.
Essential step before first use: remove shipping safety components to prevent damage or operational issues.
Instructions for connecting the water drain hose for direct drainage, including diagrams and height limits.
How to adjust the machine's stands to ensure it is level and stable on the floor by turning them.
Recommendations for moving: drain water, remove hose, move upright or tilt right, wait 12 hours before use.
Information about normal operating noises from compressor and water pump during the drying cycle.
Contact authorized service for replacement. Bulb not suitable for home lighting; intended for safe laundry loading.
Advice on identifying and drying machine-safe laundry, following label instructions. Check for coins, metal parts.
List of items not suitable for drying: undergarments with metal supports, delicate embroidery, silk, tulle.
Tips for preparing laundry: check pockets, close zippers/hooks, button up covers, turn items inside out.
Reduce energy: use high spin, sort laundry by type/thickness, don't open door often, clean filters regularly.
Guidance on maximum load capacity to avoid damage and ensure proper operation, with example weights of laundry items.
Diagram and explanation of the drying machine's control panel buttons and indicators for operation.
Visual guide to the various program and indicator symbols displayed on the machine's control panel.
Steps for preparing the machine: plug in, open door, load laundry without jamming, close door.
Details of available drying programs, their descriptions, capacity, spin speed, and estimated drying times.
Explanation of functions: Dryness Level, Wrinkle Prevention, Audible Warning, Low Temperature, End Time.
Description of various warning indicators: filter cleaning, water tank full, heat exchanger cleaning reminders.
How to initiate a drying program by pressing the Start/Stand-by button. Indicators show program is running.
How to activate/deactivate child lock to prevent program interruption. All buttons except On/Off are deactivated.
Procedure to pause, cancel, and select a different program during an ongoing drying cycle.
Instructions to pause the cycle, add/remove laundry, and then resume operation.
How to cancel a running drying program by pausing and turning off the machine. Consider refreshing cycle if hot.
Indicators light up when program ends. Loading door can be opened. Turn off machine using On/Off button.
Information on using the odour feature, referring to a separate ProScent manual for details.
Overview of steam cycles: use distilled water, group laundry by type, avoid wool/leather, remove laundry promptly.
Detailed guide on cleaning the two-part fibre filters and the interior of the loading door after each cycle.
Instructions for cleaning the humidity sensors four times a year. Use soft cloth dampened with vinegar.
Procedure for emptying the water tank after each drying session to prevent machine stopping due to a full tank.
Guide on cleaning the condenser: check metal surface every 6 months, clean fibres with damp cloth or brush.
To Next Page
