EasyManua.ls Logo

Beko BIMPO 181 - User Manual

Beko BIMPO 181
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...

Questions and Answers

  • D
    Dr. Anthony WilliamsAug 3, 2025
    What to do if my Beko BIMPO 181 Air Conditioner is not working?
    • C
      Calvin PhelpsAug 3, 2025
      If your Beko Air Conditioner isn't working, here are a few things to check: * Make sure there isn't a power failure and wait for the power to be restored. * Ensure that the power switch is turned on. * Replace the fuse if it has burned out. * Replace the remote control batteries if they are dead. * If the unit's 3-minute protection has been activated, wait three minutes after restarting the unit.
  • C
    Carmen SalazarAug 14, 2025
    Why is my Beko BIMPO 181's heating performance poor?
    • S
      staceydiazAug 14, 2025
      Your Beko Air Conditioner may have poor heating performance if the outdoor temperature is lower than 7°C (44.5°F). Also, check that cold air isn't entering through doors and windows; make sure they are closed during use. Low refrigerant due to a leak or long-term use can also cause this, so check for leaks, re-seal if necessary, and top off the refrigerant.
  • D
    Daniel JohnsonAug 19, 2025
    Why does my Beko BIMPO 181 Air Conditioner start and stop frequently?
    • E
      Eduardo WernerSep 12, 2025
      Your Beko Air Conditioner might be frequently starting and stopping because: 1. There’s too much or too little refrigerant in the system. Check for leaks and recharge the system with refrigerant. 2. There is air, incompressible gas, or foreign material in the refrigeration system. Evacuate and recharge the system with refrigerant. 3. The system circuit is blocked. Determine which circuit is blocked and replace the malfunctioning piece of equipment. 4. The compressor is broken, so replace the compressor. 5. The voltage is too high or too low, so install a manostat to regulate the voltage.
  • R
    Rebecca HayesAug 23, 2025
    Why does the indoor unit of my Beko Air Conditioner emit white mist?
    • A
      Adrienne HunterAug 23, 2025
      The indoor unit of your Beko Air Conditioner might emit white mist in humid regions due to a large temperature difference between the room’s air and the conditioned air.
  • E
    Edward StevensAug 28, 2025
    Why do both the indoor and outdoor units of my Beko BIMPO 181 Air Conditioner emit white mist?
    • J
      Jesse LopezAug 28, 2025
      Both the indoor and outdoor units of your Beko Air Conditioner might emit white mist when the unit restarts in heat mode after defrosting, due to moisture generated from the defrosting process.
  • R
    Richard BurkeNov 7, 2025
    Why is my Beko BIMPO 181 Air Conditioner having poor cooling performance?
    • P
      paul84Nov 7, 2025
      There are several reasons why your Beko Air Conditioner might have poor cooling performance: * The temperature setting may be higher than the ambient room temperature, so lower the temperature setting. * The heat exchanger on the indoor or outdoor unit might be dirty, so clean the affected heat exchanger. * The air filter might be dirty, so remove the filter and clean it according to instructions. * The air inlet or outlet of either unit might be blocked, so turn the unit off, remove the obstruction, and turn it back on. * Doors and windows might be open, so make sure that all doors and windows are closed while operating the unit. * Excessive heat might be generated by sunlight, so close windows and curtains during periods of high heat or bright sunshine. * There might be lo...

Summary

Safety Instructions

Unit Parts and Major Functions

Unit Parts

Diagrams and lists of indoor and outdoor unit components for wall-mounted, duct/ceiling, floor/standing, and cassette types.

Operating Conditions

Recommended temperature ranges for safe and effective operation in cool, heat, and dry modes.

Features

Explains compressor protection, anti-cold air, defrosting, auto-restart, white mist, and operational noise.

Energy Saving Tips

Practical advice to optimize energy consumption, such as closing curtains and using timers.

Manual Operations and Maintenance

Operation Mode Selection

Guidelines for managing multiple indoor units operating simultaneously in different modes.

Maintenance

Instructions for cleaning and preparing the unit for long periods of inactivity or servicing.

Optimal Operation

Tips for achieving best performance, comfort, and efficiency, including airflow direction and temperature.

When the Air Conditioner is to be Used Again

Steps to take before restarting the unit after a long period of non-use, including cleaning and checks.

Troubleshooting

Common Problems

Identifies common issues like unit not turning on, mode changes, or emitting white mist, along with their likely causes.

Troubleshooting Tips

Offers practical solutions for common problems such as the unit not working or poor cooling/heating performance.

European Disposal Guidelines

Installation Instructions

F-Gas Instruction

Details regulations and requirements concerning fluorinated greenhouse gases in the product.

Beko BIMPO 181 Specifications

General IconGeneral
BrandBeko
ModelBIMPO 181
CategoryAir Conditioner
LanguageEnglish

Related product manuals