Beko BP109C - User Manual

Questions and Answers

A
Adam SanchezAug 1, 2025
Why is my Beko Air Conditioner not cool enough?
- D
  Diana HarrisonAug 2, 2025
  If your Beko Air Conditioner isn't cooling sufficiently, several factors could be the cause. First, ensure that all doors and windows are completely closed. Eliminate any potential heat sources within the room. Check the exhaust air hose to confirm it's properly connected and free from blockages; clean or reconnect it as necessary. Also, verify that the temperature setting isn't set too high and adjust it accordingly. Finally, inspect the air inlet and clear any obstructions that may be present.
M
michael44Aug 5, 2025
Why is my Beko Air Conditioner so noisy?
- D
  dale70Aug 6, 2025
  If your Beko Air Conditioner is producing excessive noise, check whether it is placed on an uneven surface. Placing it on a flat, level ground may reduce the noise. Note that some noise is normal, as the sound may come from the refrigerant flowing inside the air conditioner.
S
Sandra GarciaAug 10, 2025
What does E2 code mean on Beko Air Conditioner?
- H
  harry88Aug 10, 2025
  If your Beko Air Conditioner is showing an E2 error code, it indicates that the water tank is full during cooling. To resolve this, remove the rubber stopper and empty the water.
K
Katherine DavisAug 15, 2025
What does E4 code mean on Beko BP109C Air Conditioner?
- D
  Dillon SalazarAug 15, 2025
  If your Beko Air Conditioner displays an E4 error code, it means the water tank is full when heating. Please empty the water tank to resolve this issue.
S
Sharon ReidAug 18, 2025
What does E0 code mean on Beko BP109C Air Conditioner?
- C
  Christian StevensAug 18, 2025
  If your Beko Air Conditioner is showing an E0 error code, it indicates a failure of the room temperature sensor. You can replace the room temperature sensor, although the unit can still function without doing so.
S
Scott VincentAug 23, 2025
What does E3 code mean on Beko Air Conditioner?
- M
  michael18Aug 23, 2025
  If your Beko Air Conditioner displays an E3 error code, it means that the evaporator temperature sensor has failed. To fix this, replace the evaporator temperature sensor.
Z
zgreeneAug 27, 2025
What does E1 code mean on Beko BP109C?
- B
  burketimothyAug 27, 2025
  If your Beko Air Conditioner is showing an E1 error code, it means the condenser temperature sensor has failed. Replace the condenser temperature sensor to resolve this issue.

Summary

Safety Awareness

General Safety Instructions

Provides essential safety guidelines for operating the air conditioner, covering general precautions and warnings.

R290 Refrigerant Safety Warnings

Details specific safety precautions and procedures related to the use of R290 refrigerant gas.

Product Components Overview

Included Accessories

Appearance and Function of Control Panel

Control Panel: Cooling Only Model

Details the appearance and functions of the control panel for non-reversible cooling-only models.

Control Panel: Cooling & Heat Pump Model

Details the appearance and functions of the control panel for reversible cooling and heat pump models.

Appearance and Function of Remote Control

Remote Control Functions and Display

Explains the buttons, indicators, and functions of the remote control for operating the air conditioner.

Operation Introduction

Initial Setup and Preparation

Covers initial setup, placement, and power connection requirements before operating the unit.

Operating Modes and Functions

Details various operational modes like cooling, dehumidifying, fan, heating, timer, and special functions.

Installation Explanations

General Installation Requirements

Outlines general placement, clearance, and electrical safety requirements for installation.

Exhaust Hose Installation Guide

Provides instructions for installing the exhaust hose, including temporary and window slider kit methods.

Optional Caulking Kit Installation

Describes the installation procedure for the optional universal caulking kit for windows and doors.

Hepa 13 Filter Usage (BP113 H Model)

Explains how to install and use the Hepa 13 filter specifically for the BP113H model.

Water Full Alarm and Drainage Procedures

Details the water full alarm indicator and the procedures for draining collected water.

Maintenance Explanations

Air Filter Maintenance

Instructions on how to dismount, clean, and remount the air filter for optimal performance.

Exterior Surface Cleaning

Guidance on how to clean the exterior surface of the air conditioner.

Maintenance

Maintenance Tips and Storage

Offers tips for cleaning, storing the unit, and general care for longevity.

Troubleshooting Guide

Sociable Remark

Product Disposal and Recycling

Information on proper disposal and recycling of the appliance in compliance with regulations.

Installation Instructions

F-Gas Compliance and Regulations

Covers regulations and requirements related to fluorinated greenhouse gases (F-Gas) used in the product.

Technical Specifications

Beko BP109C Specifications

General

Type	Monobloc mobile air conditioner
Timer type	Digital
Noise level	65 dB
Number of speeds	3
Comfort sleeping mode	Yes
Airflow (medium speed)	380 m³/h
Cooling capacity (max)	- BTU/h
Dehumidifying capacity	1 l/h
Timer duration (maximum)	24 h
Air conditioner functions	Cooling, Dehumidifying
Sound pressure level (min)	48 dB
Operating temperature (T-T)	18 - 35 °C
Cooling capacity in watts (max)	- W
Cooling capacity in watts (nominal)	2600 W
Cooling energy efficiency (EER, W/W)	2.6
Heating energy efficiency (COP, W/W)	-
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Energy efficiency scale	A+++ to D
Energy efficiency class (cooling)	A
Hourly energy consumption (cooling)	1 kWh
Hourly energy consumption (heating)	- kWh
Control type	Touch
Display type	LCD
Product color	White