Beko BPN112H User Manual (English)

Questions and Answers:

M
meredith40Aug 3, 2025
Why is my Beko Air Conditioner not cool enough?
- C
  cjenkinsAug 3, 2025
  If your Beko Air Conditioner isn't cooling sufficiently, several factors could be the cause. First, ensure that all doors and windows are completely closed. Eliminate any potential heat sources within the room. Check the exhaust air hose to confirm it's properly connected and free from blockages; clean or reconnect it as necessary. Also, verify that the temperature setting isn't set too high and adjust it accordingly. Finally, inspect the air inlet and clear any obstructions that may be present.
S
Susan BraunAug 7, 2025
Why is my Beko Air Conditioner so noisy?
- S
  Sabrina BlairAug 7, 2025
  If your Beko Air Conditioner is producing excessive noise, check whether it is placed on an uneven surface. Placing it on a flat, level ground may reduce the noise. Note that some noise is normal, as the sound may come from the refrigerant flowing inside the air conditioner.
M
Monique WrightAug 11, 2025
What does E2 code mean on Beko BPN112H Air Conditioner?
- B
  Benjamin HernandezAug 11, 2025
  If your Beko Air Conditioner is showing an E2 error code, it indicates that the water tank is full during cooling. To resolve this, remove the rubber stopper and empty the water.
S
Sarah RobinsonAug 15, 2025
What does E4 code mean on Beko BPN112H?
- K
  Kathleen SchaeferAug 15, 2025
  If your Beko Air Conditioner displays an E4 error code, it means the water tank is full when heating. Please empty the water tank to resolve this issue.
S
Stephen GlassAug 20, 2025
What does E0 code mean on Beko Air Conditioner?
- J
  johnsonsarahAug 20, 2025
  If your Beko Air Conditioner is showing an E0 error code, it indicates a failure of the room temperature sensor. You can replace the room temperature sensor, although the unit can still function without doing so.
N
Nancy CoxAug 23, 2025
What does E3 code mean on Beko BPN112H?
- S
  Suzanne LeonardAug 25, 2025
  If your Beko Air Conditioner displays an E3 error code, it means that the evaporator temperature sensor has failed. To fix this, replace the evaporator temperature sensor.
C
Christopher Bartlett Jr.Aug 28, 2025
What does E1 code mean on Beko BPN112H Air Conditioner?
- N
  Nancy SimmonsAug 28, 2025
  If your Beko Air Conditioner is showing an E1 error code, it means the condenser temperature sensor has failed. Replace the condenser temperature sensor to resolve this issue.

Beko BPN112H Specifications

General

Type	Portable
Energy Efficiency Ratio (EER)	2.6
Noise Level	65 dB
Refrigerant	R290
Operating Temperature (Cooling)	17-35°C
Power Cord Length	1.8 m
Exhaust Hose Length	1.5 m
Power Supply	220-240 V / 50 Hz
Dimensions (H x W x D)	765 x 467 x 397 mm