Beko BP112C - User Manual

Questions and Answers

Z
Zachary JohnsonAug 13, 2025
Why is my Beko BP112C Air Conditioner not cool enough?
- J
  Joshua OwensAug 13, 2025
  If your Beko Air Conditioner isn't cooling sufficiently, several factors could be the cause. First, ensure that all doors and windows are completely closed. Eliminate any potential heat sources within the room. Check the exhaust air hose to confirm it's properly connected and free from blockages; clean or reconnect it as necessary. Also, verify that the temperature setting isn't set too high and adjust it accordingly. Finally, inspect the air inlet and clear any obstructions that may be present.
T
Timothy LambertAug 16, 2025
What to do if my Beko Air Conditioner does not start?
- J
  john55Aug 17, 2025
  Your Beko Air Conditioner might not start due to several reasons. If the water full indicator lamp is blinking, it means the water tank is full; you should empty it. Also, if you are in heating mode, the room temperature might be higher than the set temperature, or in cooling mode, the room temperature might be lower than the set temperature. In these cases, try resetting the temperature.
J
juanmatthewsAug 20, 2025
Why is my Beko Air Conditioner so noisy?
- J
  Jane RodriguezAug 20, 2025
  If your Beko Air Conditioner is producing excessive noise, check whether it is placed on an uneven surface. Placing it on a flat, level ground may reduce the noise. Note that some noise is normal, as the sound may come from the refrigerant flowing inside the air conditioner.
E
erik19Aug 25, 2025
What does E2 code mean on Beko Air Conditioner?
- A
  Amy AyersAug 25, 2025
  If your Beko Air Conditioner is showing an E2 error code, it indicates that the water tank is full during cooling. To resolve this, remove the rubber stopper and empty the water.
D
Donna BatesAug 28, 2025
What does E4 code mean on Beko BP112C?
- D
  Dustin ReevesAug 28, 2025
  If your Beko Air Conditioner displays an E4 error code, it means the water tank is full when heating. Please empty the water tank to resolve this issue.
M
Melinda WoodsAug 31, 2025
What does E0 code mean on Beko BP112C Air Conditioner?
- V
  vhenryAug 31, 2025
  If your Beko Air Conditioner is showing an E0 error code, it indicates a failure of the room temperature sensor. You can replace the room temperature sensor, although the unit can still function without doing so.
M
Michele HuangSep 4, 2025
What does E3 code mean on Beko Air Conditioner?
- H
  Heather ThompsonSep 4, 2025
  If your Beko Air Conditioner displays an E3 error code, it means that the evaporator temperature sensor has failed. To fix this, replace the evaporator temperature sensor.
D
dsimsSep 8, 2025
What does E1 code mean on Beko BP112C?
- W
  wingramSep 8, 2025
  If your Beko Air Conditioner is showing an E1 error code, it means the condenser temperature sensor has failed. Replace the condenser temperature sensor to resolve this issue.