11 / EN
Semi-Automatic Espresso Machine / User Manual
4 Preparation
4.1 First Time Use
Remove any protective films, stickers and any other packaging material from the appliance.
150mm
1
2
3
1
3
2
150mm
150mm
150mm
Choose a safe and stable surface with
an easily reachable power supply and al-
low the minimum distance from the si-
des of the machines.
Fill the water tank with fresh, cold pure
water at least up to the MIN marking and
at most up to the MAX marking. (Do not
add hot water)
Then insert tank on to the machine and
the other end of the power cord into a
wall socket with the suitable power vol-
tage.
The power on/off button " " on the
control panel will light up. Press that but-
ton to turn on the machine. Put a cup
right under the brewing head and press
the cleaning button " ". The machine
will sound one beep and start cleaning.
Once completed the machine will be re-
ady to use.
4.2 Brewing Single / Double Espresso
beeps
3
2
1
Place the single or double espresso bas-
ket into the filter holder. Fill the freshly
ground coffee powder into the filter with
measuring spoon (approx. 8-15g) and
use the spoon to flatten the excess pow-
der. With the tamping end of the spoon,
apply around 15 kg to push down the
powder even and firmly.
Install the portafilter under the coffee
outlet. Align it with the unlock symbol,
slide it into the groove, and slowly rotate
it to the right to the lock symbol.
- Place a coffee cup right under the cof-
fee outlet.
- Press the single or double button and a
beep will sound.
- Selected coffee will start blinking and
the beverage preparation will begin.
After brewing is completed, machine will
sound one beep and enter idle mode. Re-
move the portafilter clockwise. Clean the
portafilter and dry it after each use.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
