13 / EN
Semi-Automatic Espresso Machine / User Manual
4 Preparation
beeps
Press the "cappuccino or latte" button,
then one beep sounds. The selected be-
verages button will start blinky and bre-
wing will start.
The pump will work intermittently as the
milk froth first enters your cup. After the
milk froth is ready, the device automati-
cally starts to brew the coffee.
When the unit beeps once, the beverages
is ready enjoy!
- The machine will revert to idle mode.
4.4 Brewing / Adding Milk Foam
Fill in the milk tank and adjust the knob into position. Press the milk foam button " ". Machine will start
milk dispensing automatically (90-140 ml). Once completed machine will revert back to idle stage.
Always make sure the milk tank is placed correctly. If not fitted well; the cappuccino, latte &
milk foam buttons will light off and the functions will not be available. Buzzer will sound as 3
beeps to indicate this.
The removal of the milk tank has no impact on the coffee brewing, single/double espresso
programs can be used.
4.5 Adjusting Height for Different Cup Size
For smaller cups, the cup tray (3) can be
used.
For average size cups, place cup over the
drip tray (6) in normally inserted position.
If drip dray is removed for bigger cups, it should be placed back into the machine right after beverage
preparation is completed. If drip tray is not placed back after beverage preparation, due to internal
system release, water might come to the base and would need a manual cleaning with dry cloth.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
