Why is there humidity on the outside of my Beko Refrigerator?
Condensation on the outside of your Beko refrigerator or between the doors is often due to humidity in the air, which is normal in humid weather. When the humidity decreases, the condensation should disappear.
Why is my Beko CFG1582DW making vibrations or noise?
If you're experiencing vibrations or noise from your Beko refrigerator, it could be due to an uneven or unstable floor. Adjust the feet to balance the refrigerator if it rocks. Ensure the floor is strong enough to support the refrigerator. Also, items placed on top of the refrigerator can cause noise, so remove them.
Why is food kept in the fridge compartment drawers frozen in my Beko CFG1582DW?
If food in the fridge compartment drawers of your Beko Refrigerator is freezing, the fridge temperature might be set too high. Try adjusting the fridge temperature to a lower setting and check again.
Why does the operation noise increase when my Beko Refrigerator is running?
The increase in operation noise when your Beko Refrigerator is running is normal and not a fault.
Why is there condensation on the inner walls of my Beko CFG1582DW Refrigerator?
If you notice condensation on the inner walls of your Beko refrigerator, it could be due to hot and humid weather, which increases icing and condensation. Also, ensure that you are not opening the doors frequently or leaving them ajar for extended periods. Make sure the door is completely closed.
What to do if my Beko CFG1582DW does not operate?
If your Beko Refrigerator isn't working, here are a few things to check: * Make sure the plug is securely inserted into the socket. * Check the fuse of the socket your refrigerator is connected to, or the main fuse, and replace if necessary. * Ensure the plug fits properly into the socket. * Select the appropriate temperature setting. In case of a power outage, the refrigerator will return to normal operation once the power is restored.
Why are the crispers in my Beko CFG1582DW stuck?
If the crispers in your Beko refrigerator are stuck, it could be because the food inside is touching the top of the drawer. Try rearranging the food.
Why is my Beko CFG1582DW Refrigerator running frequently or for a long time?
Your Beko Refrigerator might be running for extended periods due to several reasons: * The room temperature may be high, as it's normal for the refrigerator to operate longer in hot environments. * If the refrigerator was recently plugged in or loaded with food, it will take longer to reach the set temperature. * Large amounts of hot food might have been placed inside recently; avoid putting hot food in the refrigerator. * The doors might be opened frequently or left ajar; avoid frequent openings and ensure they are closed properly. * The temperature might be set too low; adjust it to a warmer setting and wait. * The door seal may be dirty, worn, broken, or not properly seated; clean or replace the seal if necessary.
Why is my Beko Refrigerator running so frequently?
If your Beko refrigerator is running frequently or for a long time, this could be normal if it is a new product or if the room temperature is high. It's also normal for it to run longer if it was recently plugged in or loaded with food. Avoid putting hot food inside, and do not open the doors frequently. You may also need to adjust the temperature to a warmer setting and check the door seals to ensure they are clean and properly seated; replace them if they are damaged.
Why is food freezing in the drawers of my Beko CFG1582DW?
If food kept in the fridge compartment drawers of your Beko refrigerator is freezing, the fridge temperature might be set too high. Adjust the fridge temperature to a lower value and check.
General| Door hinge | Right |
|---|---|
| Product color | White |
| Built-in display | - |
| Reversible doors | Yes |
| Shelves material | Tempered glass |
| Appliance placement | Freestanding |
| Connected load | - W |
| Energy efficiency scale | A+++ to D |
| Annual energy consumption | 311 kWh |
| Icemaker | No |
| Noise level | 41 dB |
| Climate class | SN-T |
| Total net capacity | 261 L |
| Total gross capacity | 291 L |
| Lamp type | LED |
| Fridge net capacity | 166 L |
| Fridge gross capacity | 170 L |
| Number of vegetable drawers | 1 |
| Fridge number of shelves/baskets | 4 |
| Star rating | 4* |
| Freezer position | Bottom-placed |
| Freezing capacity | 3 kg/24h |
| Freezer net capacity | 95 L |
| Freezer gross capacity | 121 L |
| Storage time during power failure | 14 h |
| Package depth | 630 mm |
| Package width | 575 mm |
| Package height | 1910 mm |
| Package weight | 61300 g |
Weight and Dimensions| Depth | 600 mm |
|---|---|
| Width | 545 mm |
| Height | 1820 mm |
| Weight | 57100 g |
Instructions for storing fresh food to be frozen, emphasizing placement in the lower part.
Details on connecting the appliance to a grounded socket, voltage compatibility, and plug safety.
Step-by-step guide on wiring a new plug to the appliance's power cord.
Recommendations for efficient operation and reduced energy consumption.
Information on the WEEE directive and proper disposal of electrical and electronic equipment.
Confirms compliance with the RoHS directive regarding hazardous materials.
Details about the recyclable nature of packaging materials and their disposal.
Key points to consider before moving or relocating the refrigerator.
Instructions for connecting the appliance to the main power supply.
Instructions on where to place the refrigerator for optimal ventilation and stability.
Guidance on how to safely dispose of packaging materials.
Instructions for environmentally friendly disposal of an old refrigerator.
Instructions to follow during the first six hours of refrigerator operation.
Explains factors influencing interior temperature and how the thermostat works.
Recommendations for storing various food items like milk, bottles, and raw meat.
Table detailing where to place different types of food within the refrigerator.
Information about the automatic defrosting process and drain pipe maintenance.
Instructions on how to remove the lowermost door shelf from the refrigerator.
Instructions on how to operate the water dispenser and tips for optimal use.
Steps for filling the water tank with fresh drinking water and warnings against other liquids.
Procedure for removing and cleaning the water tank and its components.
How to clean the drip tray that collects water from the dispenser.
Tips to prevent damage to plastic surfaces from oils and cleaning agents.
Steps to diagnose and resolve issues when the refrigerator does not start.
Explains causes and solutions for condensation inside the fridge compartment.
Troubleshooting steps for when the compressor fails to start or stops unexpectedly.
Explains normal operational noises and potential causes for increased sound.
Reasons why the refrigerator might run for extended periods and how to address them.
Troubleshooting when the freezer compartment is excessively cold.
Troubleshooting when the fridge compartment is excessively cold.
Diagnosing why food in fridge drawers is freezing and how to adjust.
Causes for high temperatures in either compartment and adjustment steps.
Addresses potential causes of vibrations and noise, including floor stability and item placement.
Explains normal noises like liquid flowing, spraying, etc., as part of the refrigeration process.
Explanation for whistling sounds, attributed to the fan operation for cooling.
Causes of condensation on inner walls, including humidity and door usage.
Explains condensation on the exterior or door seals due to ambient humidity.
Troubleshooting steps for eliminating bad smells, including cleaning and food storage.
Reasons why the door may not close, such as obstructions or uneven floor, and solutions.
How to resolve issues with stuck crisper drawers, often due to food placement.
Explanation for high temperatures on product surfaces during operation.
Details the types of repairs and parts covered under the Beko manufacturer's guarantee.
Lists exclusions from the manufacturer's guarantee, such as transit damage and accessories.
Key notes regarding product usage, installation, and guarantee validity.
Information on Beko's policy regarding product replacements versus repairs.
Details on engineer availability and appointment scheduling for repairs.
Conditions under which charges may apply for repair services.
Terms and conditions for the 10-year guarantee on ProSmart Inverter Motors.
Procedure for making a claim against the ProSmart Inverter Motor guarantee.
Contact information and procedure for obtaining service or product advice.
Information on obtaining service and support after the standard manufacturer's guarantee expires.
Instructions for contacting Beko through their website's contact form.
Guidance on registering the product for guarantee activation and extended warranties.
To Next Page
