To Next PageTo Next PageWhy won't my Beko DUT25401W start?
If your Beko Dishwasher doesn't start, several factors could be the cause. First, check if the power cable is properly plugged in. Also, inspect the circuit breaker in your house to ensure it hasn't blown. Make sure the water inlet tap is open and that the dishwasher door is fully closed. Finally, verify that you've pressed the On/Off button to turn on the machine.
How to get my Beko DUT25401W Dishwasher to clean dishes better?
If your Beko Dishwasher isn't cleaning dishes well, several issues might be at play. Ensure dishes are loaded properly as described in the user manual. Select a program with a higher temperature and cycle time. Check that the wash arms aren't stuck and can rotate freely; also, clean the wash arm holes and filters regularly. Verify the filters are installed correctly and that the baskets aren't overloaded. Store powder detergent in a closed container in a dry place or switch to tablet detergents. Adjust the detergent amount based on how dirty the dishes are, and check/increase the rinse aid if needed. Finally, ensure the detergent dispenser lid is closed tightly after adding detergent.
Why are my dishes still wet after my Beko DUT25401W cycle?
If dishes aren't drying in your Beko Dishwasher, make sure they are placed so water doesn't accumulate. Check and add rinse aid if necessary, or increase the rinse aid setting. Avoid unloading the dishwasher immediately after the cycle; instead, slightly open the door and wait for the steam to evacuate before unloading, starting with the lower basket. Select a program with a longer duration for better drying. Note that some kitchen utensils may not be suitable for dishwasher cleaning.
Why is there water left in my Beko DUT25401W after the cycle?
If water remains in your Beko Dishwasher after the cycle, clean the filter system regularly. Also, check the discharge hose for clogs or blockages. If necessary, remove the hose, clear any blockages, and reinsert it as shown in the user manual.
What to do if stains remain on dishes after Beko DUT25401W Dishwasher cycle?
If stains persist on dishes after a Beko Dishwasher cycle, try selecting a program with a higher temperature and cycle time. Note that some kitchen utensils may not be suitable for dishwasher cleaning. If you are using powder detergent, do not store the detergent package in humid places. Keep it in a closed container if possible, or use tablet detergents.
How to remove milk-like film from glasses in my Beko Dishwasher?
If a smear resembling a milk stain remains on glasses after washing in your Beko Dishwasher, try lowering the rinse aid setting and clean any spilled rinse aid. Also, measure the hardness of the water supply and check the water hardness setting, as corrosion may have occurred due to soft water.
Why does detergent remain in the dispenser of my Beko DUT25401W?
If detergent remains in the dispenser of your Beko Dishwasher, ensure the dispenser is dry before adding detergent and add detergent shortly before starting the wash. Position dishes so they don't block the dispenser lid from opening. If using powder detergent, avoid storing it in humid conditions. Clean the Wash Arm regularly.
Why does my Beko Dishwasher smell?
If there's an odor in your Beko Dishwasher, clean the filter system regularly. If you're not starting the machine immediately after loading, remove food remnants and run the prewash program without detergent every 2 days.
Why are my dishes getting scratched in my Beko DUT25401W?
If your dishes are getting scratched in your Beko Dishwasher, run the prewash program to remove any spilled salt. Measure the hardness of the water supply and check the water hardness setting. Also, make sure you load the dishes properly as described in the user manual.
Why is there rust or discoloration on dishes from my Beko DUT25401W Dishwasher?
If you notice rust, discoloration, or surface deterioration on dishes from your Beko Dishwasher, run the prewash program to remove any spilled salt. Ensure salty food remnants are prewashed or washed immediately. Check if the electrical installation is properly grounded. Avoid using intensive cleansers like bleach. Use metal utensils only for their intended purposes. Note that silverware made of low-quality stainless steel and already corroded items should not be washed in the dishwasher.
General| Style | built in |
|---|---|
| Color | white |
| Load Capacity | 14 place settings |
| Number of Cycles | 5 |
| Number of Options | 5 |
| Drying Type | static |
| Noise level | 48 db |
| Control Type | lcd, 2 rows; touchpad |
| Delay Start | yes |
| Spray Arms | 3 |
| Water Filter | yes |
| Leak Protection | yes |
| Water Softener | no |
| Sanitize Settings | yes |
| Half Load | yes |
| Wi-Fi | no |
| Smart Home | no |
| Remote Control | no |
| Voltage | 120 volts |
| Current | 12 a |
Weight and Dimensions| Depth | 22 7/16 inch |
|---|---|
| Height | 33 7/8 inch |
| Width | 23 9/16 inch |
