To Next Page
J
Justin WilliamsSep 4, 2025
What does error E16-E21 mean on my Beko hob?
- JjonesscottSep 4, 2025
Turn the induction hob off and operate again after 30 seconds. Contact the authorized dealership if the issue is resumed.
What does error E16-E21 mean on my Beko hob?
Turn the induction hob off and operate again after 30 seconds. Contact the authorized dealership if the issue is resumed.
Is it normal for the cooling fan to run after turning off my Beko Hob?
This is normal. The cooling fan continues to operate until the electronic equipment in the Beko hob reaches an appropriate temperature.
Why is my Beko HII64401QT Hob making noise while cooking?
Some sounds may be heard from the Beko hob while cooking. These sounds are due to the composition of the cooking vessel. These sounds are normal, they are not a malfunction and they are a part of induction technology.
Why is the icon always lit on my Beko Hob zone display?
If the icon is always lit on your Beko hob zone display, it could be due to several reasons. Ensure that a pot is placed on the hob zone. Verify that your pot is suitable for induction cooking. Make sure the pot is centered correctly on the hob zone and that its bottom surface is wide enough. The pot or hob zone may also be too hot; allow them to cool down.
What does error E52-E57 mean on my Beko HII64401QT Hob?
Turn the induction hob off and wait until it is cooled down. The error shall be resolved when temperature of the sensor comes down below the limits. Contact the authorized dealership if the issue is resumed.
What does error E48 E49 E51 mean on my Beko HII64401QT Hob?
Sensor equipment shall be rendered compatible for the operating conditions. Contact the authorized dealership if the issue is resumed.
What to do if my Beko HII64401QT Hob displays error code E31 – E45?
Turn the induction hob off and operate again after 30 seconds. Contact the authorized dealership if the issue is resumed.
What does error code E25 mean on a Beko HII64401QT?
Turn the induction hob off and operate again after 30 seconds. Contact the authorized dealership if the issue is resumed.
What does error E23 E24 mean on Beko hob?
Turn the induction hob off and operate again after 30 seconds. Contact the authorized dealership if the issue is resumed.
How to fix a Beko HII64401QT that won't turn on?
If your Beko Hob isn't working, there are several possible reasons. First, check the fuses in the fuse box and replace or reactivate them if necessary. Ensure the hob is properly plugged into the outlet. If your hob has a key lock feature, make sure it is disabled. Try unplugging the hob, waiting 20 seconds, and then plugging it back in. It may also be due to overheat protection, so allow the hob to cool down. Finally, make sure you are using appropriate pots.
General
