How to troubleshoot a Beko HII64760UFT that does not work?
If your Beko hob isn't working, start by checking the fuses in the fuse box and replace or reactivate them if necessary. Also, ensure the appliance is properly plugged into a grounded outlet. If your hob has a key lock feature, make sure it is disabled. Finally, try unplugging the hob, waiting at least 20 seconds, and then plugging it back in.
What to do if Beko hob zone suddenly turns off?
If the selected hob zone on your Beko suddenly turns off, it might be because the cooking time you set has expired. You can either set a new cooking time or simply finish your cooking. It could also be due to overheating, so allow the hob to cool down. Finally, make sure there are no objects on the control panel, and if there are, remove them.
Why isn't my Beko HII64760UFT heating up even though it's turned on?
If your Beko hob zone is on but the pot isn't heating up, the pot might not be suitable for induction cooking. Check that your cookware is compatible with induction hobs. Also, the pot might not be centered correctly on the hob zone, or the bottom surface of the pan might not be wide enough for the selected hob zone. Ensure the pot is centered and appropriately sized for the hob zone.
Why is the icon always lit on my Beko hob zone display?
If the icon is always lit on the hob zone display of your Beko hob, first ensure there is a pot placed on the operating hob zone. Verify that your pot is suitable for induction cooking. Also, check that the pot is centered correctly on the hob zone and that its bottom surface is wide enough for the selected zone. If the hob is too hot, wait for it to cool down.
Why does the cooling fan continue to run even though the Beko HII64760UFT Hob is turned off?
This is normal. The cooling fan in your Beko hob continues to run after it's turned off to cool the electronic components until they reach a safe temperature.
What does FF error mean on a Beko hob?
The FF error on your Beko hob indicates that one of the keys may have been touched for too long, a cooking pot may be over the control unit, or food/liquid may have been poured over the control unit. The error will disappear when you stop touching the key, lift the cooking pot, or clean the food/liquid residues.
What does error E 46 mean on a Beko HII64760UFT Hob?
The E 46 error on your Beko hob indicates that one or more keys have been pressed for more than 10 seconds, an object is left on the control panel, or the control is exposed to vapour. The problem should resolve when you remove your hand, clean the control panel.
What does error E 47 mean on a Beko hob?
The E 47 error on your Beko hob means that you are not using a pot suitable for induction heating. To resolve this, use a pot that is designed for induction heating.
What does error E 22 E 26 mean on a Beko HII64760UFT?
The E 22 or E 26 error code on your Beko induction hob indicates that the hob is overheated. Turn off the hob and wait for it to cool down. The error should disappear once the temperature is within the normal range.
What does error E 58 - E 59 mean on a Beko hob?
The E 58 - E 59 error on your Beko induction hob indicates a sensor error or high temperature error has occurred in auto cook mode. Turn off the induction hob and allow it to cool down. If the problem continues, contact an authorized service.
To Next Page
General
