To Next Page
A
Ashley HernandezSep 7, 2025
What does error code E25 mean on a Beko HII64401QT?
- TThomas ZunigaSep 7, 2025
Turn the induction hob off and operate again after 30 seconds. Contact the authorized dealership if the issue is resumed.
What does error code E25 mean on a Beko HII64401QT?
Turn the induction hob off and operate again after 30 seconds. Contact the authorized dealership if the issue is resumed.
What to do if my Beko HII64401QT Hob displays error code E31 – E45?
Turn the induction hob off and operate again after 30 seconds. Contact the authorized dealership if the issue is resumed.
What does error E48 E49 E51 mean on my Beko HII64401QT Hob?
Sensor equipment shall be rendered compatible for the operating conditions. Contact the authorized dealership if the issue is resumed.
What does error E52-E57 mean on my Beko HII64401QT Hob?
Turn the induction hob off and wait until it is cooled down. The error shall be resolved when temperature of the sensor comes down below the limits. Contact the authorized dealership if the issue is resumed.
Why is the icon always lit on my Beko Hob zone display?
If the icon is always lit on your Beko hob zone display, it could be due to several reasons. Ensure that a pot is placed on the hob zone. Verify that your pot is suitable for induction cooking. Make sure the pot is centered correctly on the hob zone and that its bottom surface is wide enough. The pot or hob zone may also be too hot; allow them to cool down.
General
