Why is there no gas in my Beko Hob?
If there is no gas in your Beko Hob, check if the main gas valve is shut off and turn it on. Also, ensure that the gas pipe is properly installed, as it may have leaned.
Why are my Beko HIML 95225 SXE Hob burners not burning properly?
If the Beko Hob burners aren't burning properly, several factors could be the cause. The burners may be dirty and need cleaning, or they might be wet and require drying. Ensure the burner cap is correctly positioned. If the main gas valve is shut off, turn it on. If you're using LPG, the gas cylinder could be empty and needs replacing. Finally, make sure to hold the burner knob/button pressed long enough during ignition.
What to do if my Beko HIML 95225 SXE Hob is continuously sparking?
If your Beko Hob is continuously sparking, unplug the product and wait for it to cool. Effluent fluids may have penetrated into the ignition mechanism under the control knobs.
What to do if my Beko HIML 95225 SXE is making a clanging noise?
This clanging sound in your Beko Hob while heating and cooling is not a failure.
What to do if there is no gas in my Beko HIML 95225 SXE?
If there is no gas in your Beko Hob, check the following: * Ensure the main gas valve is turned on. * Verify that the gas pipe is properly installed. * If using LPG, check if the gas cylinder is empty and replace it if needed. * Make sure to press and hold the burner knob/button for at least 3-5 seconds during ignition.
Why does my Beko HIML 95225 SXE Hob make a clanging sound when heating up?
This clanging sound from your Beko Hob while heating and cooling is normal and not a failure.
To Next Page
General
