M
Mrs. Jennifer CalderonAug 13, 2025
Why are the washing results poor in my Beko QDW696?
- SSarah DrakeAug 13, 2025
Poor washing results with your Beko Dishwasher can stem from several causes. You might not be using enough detergent, especially for full loads or hard water; in this case, increase the detergent amount. Hard water itself can be a culprit, so increase the water softener dosage and consider using additional detergent and rinse aid. Check and clean the spray arms and filter system, as they may be blocked. Ensure you're loading the dishwasher correctly, allowing water to reach all surfaces, and that you are not overcrowding it. Also, check your mains water pressure to ensure sufficient water fill. If you pre-wash items, rinse them thoroughly to remove any dishwashing detergent to prevent oversudsing. Finally, ensure your powder detergent is fresh and stored properly.