What to do if my Beko WMI 71442 Washer doesn't switch to spinning?
If your Beko Washer isn't spinning, it could be due to an unbalanced load, water not draining completely, or excessive foam. The automatic unbalanced load detection system may be activated if laundry is unevenly distributed in the drum. Check the filter and drain hose to ensure proper drainage. Also, using too much detergent can cause excessive foam, which prevents spinning.
What to do if my Beko WMI 71442 is not rinsing well?
Poor rinsing in your Beko Washer can be due to inappropriate detergent amount, brand, or storage; detergent in the wrong compartment; a clogged pump filter; or a folded drain hose. Use suitable detergent, store it properly, put it in the correct compartment, and check the filter and drain hose.
What to do if my Beko WMI 71442 Washer laundry remains wet?
If laundry remains wet in your Beko Washer, it may be due to excessive foam activating the automatic foam absorption system. Try using the recommended amount of detergent in future washes.
Why does my Beko WMI 71442 laundry not smell like softener?
If your laundry doesn't smell like softener after washing in your Beko Washer, it may be because detergent was put in the wrong compartment or detergent might be mixed with the softener. Ensure you put the detergent in the correct compartment and don't mix it with the softener. Clean the dispenser with hot water.
Why does my Beko WMI 71442 Washer take so long to wash?
Several factors can cause your Beko Washer to take longer than expected: low water pressure, low voltage, low input water temperature, increased number of rinses or rinse water amount, or excessive foam due to too much detergent. The machine adjusts washing time to ensure quality, especially when water pressure or voltage is low, or when more rinsing is needed. Using too much detergent can also activate the automatic foam absorption system, prolonging the wash.
Why does my Beko WMI 71442 have detergent residue in the drawer?
Detergent residue in your Beko Washer's drawer can occur if the drawer is wet when you add detergent, the detergent has become damp, water pressure is low, the detergent compartment holes are blocked, or detergent is mixed with softener. Ensure the drawer is dry, store detergent properly, check water pressure, and clear any blockages in the compartment holes. Do not mix detergent with softener.
What to do if my Beko WMI 71442 Washer programme time does not countdown?
If the programme time on your Beko Washer isn't counting down, the timer may pause during water intake, heating, or spinning. The timer will not countdown until the machine takes in enough water or reaches the selected temperature. Also, the automatic unbalanced load detection system might be activated if the laundry is not evenly distributed during the spinning step.
Why is my Beko WMI 71442 Washer laundry turning grey?
Laundry turning grey in your Beko Washer may be due to using too little detergent over time, washing at low temperatures for too long, or using too little detergent with hard water, or using too much detergent. Ensure you use the recommended amount of detergent for your water hardness and laundry type. Also, select the appropriate temperature for your laundry.
What to do if my Beko Washer has too much foam?
Excessive foam in your Beko Washer can be caused by using improper detergents, using too much detergent, storing detergent improperly, washing meshed laundry, putting detergent in the wrong compartment, or softener being taken early. Use detergents suitable for washing machines, use only the necessary amount of detergent, store detergent properly in a closed and dry location, use less detergent for meshed laundry, and ensure detergent is placed in the correct compartment.
What to do if my Beko Washer clothes smell unpleasantly?
Unpleasant smells in your Beko Washer can result from odors and bacteria forming on the drum due to continuous washing at lower temperatures and/or in short programmes. To prevent this, leave the detergent drawer and loading door ajar after each wash to avoid a humid environment that encourages bacteria growth.
Explains the meaning of symbols used throughout the user manual for better understanding.
Provides essential safety rules to prevent injuries and material damage.
Outlines precautions to ensure the safety of children around the washing machine.
Details crucial electrical safety measures for operating the washing machine.
Warns about hot surfaces, covers WEEE compliance, package info, and intended use.
Provides a visual overview and labels of the main components of the washing machine.
Lists all items included in the product packaging for the user.
Details the technical data and performance specifications of the washing machine.
Guides on selecting a place, removing packaging, and transport locks.
Explains how to connect to water supply and drain, including pressure requirements.
Guides on leveling the machine and safe electrical connection procedures.
Covers electrical requirements, plug fitting, and transporting the product.
Advises on how to sort laundry based on fabric type, color, and soiling level.
Tips for preparing clothes, economical operation, and first-time use.
Explains load capacity, loading, and how to use detergents and softeners.
Explains the function and use of each compartment in the detergent drawer.
Instructions for pre-wash, using bleach, starch, and eliminating lime formation.
Provides practical advice for achieving efficient and effective washing results.
Describes the functions of controls and symbols on the machine's panel and display.
Steps for preparing the machine and selecting programmes like Cottons, Synthetics, Woollens.
Explains special programmes like Cottons Eco, BabyClothing, Hand wash, etc.
Describes specific programmes and how to adjust the wash temperature.
Details on selecting spin speed, Rinse Hold, and No Spin options.
A table listing programmes, consumption, and auxiliary functions.
Specific consumption data and indicative values for synthetic programmes.
Explains how to select and use auxiliary functions like Prewash, Quicker Wash, Extra Rinse, Anti-Crease.
Information on the time display and how to set a delayed start for programmes.
Instructions on starting, progress, door lock, and changing selections mid-cycle.
How to activate/deactivate child lock and cancel an ongoing wash programme.
Explains Rinse Hold, end of programme indications, and standby mode.
Step-by-step guide to cleaning the detergent drawer and the interior drum.
Instructions for cleaning the exterior, control panel, and water intake filters.
Procedure for draining residual water and cleaning the pump filter.
Detailed steps for draining water using the emergency hose and cleaning the pump filter.
Solutions for programme start, operation, noise, vibration, and door lock issues.
Troubleshooting steps for water filling, draining, and unexpected stopping.
Reasons and solutions for long cycle times and timer malfunctions.
Explains problems with not switching to spin or unbalanced loads.
Addresses grey laundry, stains, odors, color fading, and oily stains.
Solutions for laundry not rinsing well, becoming stiff, or softener scent issues.
Problems related to detergent residue, excessive foam, and improper dispensing.
Solutions for laundry being excessively wet at the end of the programme.
Provides necessary dimensions and diagrams for integrating the machine into cabinets.
Illustrates how the washing machine is integrated into kitchen cabinets.
Detailed measurements and diagrams for mounting the machine within a cabinet.
Further detailed measurements and diagrams for cabinet integration.
Instructions for installing hinges and ensuring correct cabinet door operation.
Visuals showing the final integration of the washing machine with cabinet doors.
Detailed steps for attaching hinges to the cabinet and machine for integration.
Instructions for attaching decorative covers to the integrated doors.
Shows final placement, service references, and the integrated unit view.
A final view of the washing machine integrated within the cabinet with doors open.
Explains what is covered and not covered by the product warranty.
Key points on usage, installation, guarantee validity, and replacement policy.
Details on the availability and timing of repair appointments.
Conditions under which charges may apply for service calls.
Instructions and information needed when requesting service.
Information on appliance registration and obtaining service after the guarantee expires.
Explains the meaning of symbols used throughout the user manual for better understanding.
Provides essential safety rules to prevent injuries and material damage.
Outlines precautions to ensure the safety of children around the washing machine.
Details crucial electrical safety measures for operating the washing machine.
Warns about hot surfaces, covers WEEE compliance, package info, and intended use.
Provides a visual overview and labels of the main components of the washing machine.
Lists all items included in the product packaging for the user.
Details the technical data and performance specifications of the washing machine.
Guides on selecting a place, removing packaging, and transport locks.
Explains how to connect to water supply and drain, including pressure requirements.
Guides on leveling the machine and safe electrical connection procedures.
Covers electrical requirements, plug fitting, and transporting the product.
Advises on how to sort laundry based on fabric type, color, and soiling level.
Tips for preparing clothes, economical operation, and first-time use.
Explains load capacity, loading, and how to use detergents and softeners.
Explains the function and use of each compartment in the detergent drawer.
Instructions for pre-wash, using bleach, starch, and eliminating lime formation.
Provides practical advice for achieving efficient and effective washing results.
Describes the functions of controls and symbols on the machine's panel and display.
Steps for preparing the machine and selecting programmes like Cottons, Synthetics, Woollens.
Explains special programmes like Cottons Eco, BabyClothing, Hand wash, etc.
Describes specific programmes and how to adjust the wash temperature.
Details on selecting spin speed, Rinse Hold, and No Spin options.
A table listing programmes, consumption, and auxiliary functions.
Specific consumption data and indicative values for synthetic programmes.
Explains how to select and use auxiliary functions like Prewash, Quicker Wash, Extra Rinse, Anti-Crease.
Information on the time display and how to set a delayed start for programmes.
Instructions on starting, progress, door lock, and changing selections mid-cycle.
How to activate/deactivate child lock and cancel an ongoing wash programme.
Explains Rinse Hold, end of programme indications, and standby mode.
Step-by-step guide to cleaning the detergent drawer and the interior drum.
Instructions for cleaning the exterior, control panel, and water intake filters.
Procedure for draining residual water and cleaning the pump filter.
Detailed steps for draining water using the emergency hose and cleaning the pump filter.
Solutions for programme start, operation, noise, vibration, and door lock issues.
Troubleshooting steps for water filling, draining, and unexpected stopping.
Reasons and solutions for long cycle times and timer malfunctions.
Explains problems with not switching to spin or unbalanced loads.
Addresses grey laundry, stains, odors, color fading, and oily stains.
Solutions for laundry not rinsing well, becoming stiff, or softener scent issues.
Problems related to detergent residue, excessive foam, and improper dispensing.
Solutions for laundry being excessively wet at the end of the programme.
Provides necessary dimensions and diagrams for integrating the machine into cabinets.
Illustrates how the washing machine is integrated into kitchen cabinets.
Detailed measurements and diagrams for mounting the machine within a cabinet.
Further detailed measurements and diagrams for cabinet integration.
Instructions for installing hinges and ensuring correct cabinet door operation.
Visuals showing the final integration of the washing machine with cabinet doors.
Detailed steps for attaching hinges to the cabinet and machine for integration.
Instructions for attaching decorative covers to the integrated doors.
Shows final placement, service references, and the integrated unit view.
A final view of the washing machine integrated within the cabinet with doors open.
Explains what is covered and not covered by the product warranty.
Key points on usage, installation, guarantee validity, and replacement policy.
Details on the availability and timing of repair appointments.
Conditions under which charges may apply for service calls.
Instructions and information needed when requesting service.
Information on appliance registration and obtaining service after the guarantee expires.
To Next Page
General
