What to do if my Beko WMY 61283 CS PTLB2 Washer does not drain water?
If your Beko washer isn't draining, the water drain hose might be clogged or twisted, so clean or flatten the hose. Alternatively, the pump filter might be clogged, so clean the pump filter.
Why won't my Beko Washer door open?
The door lock on your Beko washer might be activated because of the water level; drain the water by running the Pump or Spin programme. If the machine is heating water or spinning, wait until the programme completes. Also, the child lock might be engaged; wait a couple of minutes after the programme ends for the door lock to deactivate.
Why does my Beko WMY 61283 CS PTLB2 Washer not switch to spinning step?
Your Beko washer might not switch to the spinning step due to an unbalanced load; the automatic load detection system may be activated. Also, the machine won't spin if water isn't completely drained, so check the filter and drain hose. Excessive foam from too much detergent can also prevent spinning, so use the recommended amount of detergent.
What to do if my Beko Washer machine does not fill with water?
If your Beko washing machine isn't filling with water, make sure the tap is turned on. Check if the water inlet hose is bent and flatten it if necessary. Also, the water inlet filter might be clogged, so clean the filter. Finally, ensure that the loading door is completely closed.
Why is my Beko Washer not rinsing well?
If your Beko washer isn't rinsing well, it could be due to the detergent's amount, brand, or storage conditions being inappropriate. Also, the detergent may be in the wrong compartment, the pump filter may be clogged or the drain hose may be folded. Use a suitable detergent, place it correctly, and check the filter and drain hose.
Why does my Beko WMY 61283 CS PTLB2 Washer take longer than expected to wash?
Several factors can cause your Beko washer to take longer: low water pressure, which causes the machine to wait until it has enough water; low voltage, which prolongs washing time to avoid poor results; low input water temperature, which extends heating time; increased number of rinses or rinse water amount; or excessive foam due to too much detergent. In the last case, use the recommended amount of detergent.
Why does my Beko WMY 61283 CS PTLB2 programme not start?
Your Beko washing machine may have switched to self-protection mode due to a supply problem such as line voltage or water pressure issues. To resolve this, press and hold the On/Off button for 3 seconds.
Why does my Beko WMY 61283 CS PTLB2 stop shortly after starting?
Your Beko washing machine might have stopped temporarily due to low voltage. It will resume running when the voltage returns to normal.
Why is my Beko WMY 61283 CS PTLB2 Washer laundry still wet after the cycle?
If your laundry is still wet after a cycle in your Beko washer, excessive foam might have occurred due to using too much detergent. The automatic foam absorption system may have been activated. Use the recommended amount of detergent.
Why is my Beko WMY 61283 CS PTLB2 laundry gray after washing?
If your laundry turns gray after washing in your Beko washer, it could be due to using too little detergent over a long period, washing at low temperatures for too long, or using too little detergent with hard water. Also, using too much detergent can be the reason. Use the recommended amount of detergent appropriate for water hardness and the laundry and select the proper temperature.
General| Door hinge | Left |
|---|---|
| Loading type | Front-load |
| Product color | White |
| Built-in display | Yes |
| Appliance placement | Freestanding |
| Half-load | - |
| Drum capacity | 6 kg |
| Delay start (max) | 24 h |
| Residual moisture | 53 % |
| Spin-drying class | B |
| Maximum spin speed | 1200 RPM |
| Noise level (spin) | 75 dB |
| Noise level (wash) | 51 dB |
| Number of washing programs | 16 |
| Current | 10 A |
| Connected load | 2200 W |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Water consumption per cycle | - L |
| Energy consumption washing per cycle | 0.78 kWh |
| Annual water consumption washing | 8549 L |
| Annual energy consumption washing | 137 kWh |
Weight and Dimensions| Depth | 500 mm |
|---|---|
| Width | 600 mm |
| Height | 850 mm |
| Weight | 64000 g |
Safety guidelines to prevent injuries and material damage risks.
Safety precautions for children's interaction with the appliance.
Warnings about hot surfaces like door glass during operation.
Information on proper disposal of electrical and electronic equipment.
Details on the recyclable nature of packaging materials.
Guidance on selecting a stable and suitable location for the washing machine.
Steps to safely remove packaging materials before installation.
Instructions for removing transport safety bolts before operation.
Guidelines for securely connecting the drain hose to the waste water outlet.
Requirements for a safe and compliant electrical connection.
Essential steps to perform before the first wash cycle.
How to sort laundry by fabric type, color, and soiling level.
Steps to prepare clothes, such as checking pockets and fasteners.
Recommendations for efficient and eco-friendly washing.
Instructions on how to load laundry items into the drum.
Guidance on the maximum load that can be safely washed.
Instructions for using gel detergents and tablet detergents.
How to safely use bleaching agents and decolorants.
Identification and explanation of all buttons and indicators on the control panel.
Step-by-step guide to selecting the appropriate washing programme.
How to adjust and select the spin speed for optimal drying.
Instructions on how to initiate the selected washing programme.
Information on the function and indication of the door lock.
How to modify settings like auxiliary functions, speed, and temperature after starting.
How to activate and deactivate the child lock feature for safety.
Procedure for cancelling an ongoing washing programme.
Indication of programme completion and machine standby mode.
Instructions for cleaning the detergent dispenser to prevent buildup.
Steps for cleaning the drum and door seal to remove residues.
How to clean the exterior of the machine and its control panel.
Steps to drain residual water and clean the pump filter.
Solutions for issues with starting, water filling, draining, and programme timing.
Troubleshooting poor washing results, noise, vibration, and unpleasant odors.
Resolving problems related to detergent use, foam, stiffness, and laundry remaining wet.
To Next Page
