Beko WMY 61283 CS PTLB2 User Manual (English)

Questions and Answers:

Y
yrobertsSep 5, 2025
Why is the washing performance of my Beko WMY 61283 CS PTLB2 Washer poor?
- S
  Scott UnderwoodSep 5, 2025
  Poor washing performance in your Beko washer, with stains persisting or laundry not whitening, can result from using too little detergent, overloading the machine, selecting the wrong programme and temperature, or using the wrong type of detergent. Also, using too much detergent can be the reason. Ensure you use the correct amount and type of detergent, select the appropriate settings, and avoid overloading.
C
Colleen WoodSep 6, 2025
Why does my Beko Washer laundry smell unpleasant after washing?
- M
  Matthew WashingtonSep 6, 2025
  Unpleasant smells in your Beko washer can arise from odours and bacteria forming due to continuous washing at low temperatures or in short programmes. Leave the detergent drawer and loading door ajar after each wash to prevent this. Other causes include overloading the machine or using damp detergent. Do not load the machine in excess. Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures.
P
Peggy WilsonSep 7, 2025
Why is there detergent residue in my Beko WMY 61283 CS PTLB2 detergent drawer?
- R
  richard29Sep 8, 2025
  Detergent residue in your Beko washer's drawer can occur if the drawer is wet when you add detergent, the detergent has gotten damp, the water pressure is low, or the detergent compartment holes are blocked. Also, the detergent might be mixed with the softener, there may be a problem with the detergent drawer valves or regular drum cleaning is not applied. Dry the drawer before adding detergent, keep detergents in a dry place, check water pressure, and clean any clogged holes. If the problem persists, call the Authorized Service Agent.
G
Gabriel HansenSep 8, 2025
Why is there too much foam in my Beko WMY 61283 CS PTLB2 Washer?
- H
  hjohnsonSep 9, 2025
  Excessive foam in your Beko washer can be caused by using improper detergents, using too much detergent, or storing detergent improperly. Also, some meshed laundry such as tulle may foam too much because of their texture, the detergent may be put in the wrong compartment or the softener may be being taken early. Use appropriate detergents in the correct amounts, store them properly, and use less detergent for meshed laundry. If the problem persists, call the Authorized Service Agent.
J
Joseph MannSep 10, 2025
Why is my Beko WMY 61283 CS PTLB2 laundry stiff after washing?
- D
  Dylan GonzalezSep 12, 2025
  Laundry can become stiff after washing in your Beko washer if you use too little detergent for the water hardness, if detergent is put in the prewash compartment although prewash cycle is not selected, or if detergent is mixed with softener. Use the correct amount of detergent, put it in the right compartment, and don't mix it with softener. Also, wash and clean the dispenser with hot water.
G
George MaySep 12, 2025
Why does my Beko WMY 61283 CS PTLB2 Washer laundry not smell like softener?
- S
  Sarah GatesSep 12, 2025
  If your laundry doesn't smell like softener after washing in your Beko washer, it may be because detergent is put in the prewash compartment although prewash cycle is not selected, or the detergent might be mixed with the softener. Put the detergent in the correct compartment and do not mix the softener with detergent. Wash and clean the dispenser with hot water.

Beko WMY 61283 CS PTLB2 Specifications

General

Door hinge	Left
Loading type	Front-load
Product color	White
Built-in display	Yes
Appliance placement	Freestanding
Half-load	-
Drum capacity	6 kg
Delay start (max)	24 h
Residual moisture	53 %
Spin-drying class	B
Maximum spin speed	1200 RPM
Noise level (spin)	75 dB
Noise level (wash)	51 dB
Number of washing programs	16
Current	10 A
Connected load	2200 W
AC input voltage	230 V
AC input frequency	50 Hz
Water consumption per cycle	- L
Energy consumption washing per cycle	0.78 kWh
Annual water consumption washing	8549 L
Annual energy consumption washing	137 kWh

Weight and Dimensions

Depth	500 mm
Width	600 mm
Height	850 mm
Weight	64000 g

Summary

General Safety Instructions

1.1 Life and Property Safety

Safety guidelines to prevent injuries and material damage risks.

1.2 Children's Safety

Safety precautions for children's interaction with the appliance.

1.3 Electrical Safety

1.4 Hot Surface Safety

Warnings about hot surfaces like door glass during operation.

2 Important Instructions for Environment

2.1 Compliance with WEEE Directive

Information on proper disposal of electrical and electronic equipment.

2.2 Package Information

Details on the recyclable nature of packaging materials.

3 Intended Use

4 Technical Specifications

4.1 Installation

4.1.1 Appropriate Installation Location

Guidance on selecting a stable and suitable location for the washing machine.

4.1.2 Removing Packaging Reinforcement

Steps to safely remove packaging materials before installation.

4.1.3 Removing the Transportation Locks

Instructions for removing transport safety bolts before operation.

4.1.4 Connecting Water Supply

4.1.5 Connecting the Drain Hose to the Drain

Guidelines for securely connecting the drain hose to the waste water outlet.

4.1.6 Adjusting the Feet

4.1.7 Electrical Connection

Requirements for a safe and compliant electrical connection.

4.1.8 Initial Use

Essential steps to perform before the first wash cycle.

4.2 Preparation

4.2.1 Sorting the Laundry

How to sort laundry by fabric type, color, and soiling level.

4.2.2 Preparing Laundry for Washing

Steps to prepare clothes, such as checking pockets and fasteners.

4.2.3 Energy Saving Tips

Recommendations for efficient and eco-friendly washing.

4.2.4 Loading the Laundry

Instructions on how to load laundry items into the drum.

4.2.5 Correct Load Capacity

Guidance on the maximum load that can be safely washed.

4.2.6 Using Detergent and Softener

Using Liquid Detergents

Using Gel and Tablet Detergent

Instructions for using gel detergents and tablet detergents.

Using Bleaches

How to safely use bleaching agents and decolorants.

4.2.7 Tips for Efficient Washing

4.3 Operating the Product

4.3.1 Control Panel Overview

Identification and explanation of all buttons and indicators on the control panel.

4.3.2 Programme Selection

Step-by-step guide to selecting the appropriate washing programme.

4.3.3 Programmes

4.3.4 Temperature Selection

4.3.5 Spin Speed Selection

How to adjust and select the spin speed for optimal drying.

4.3.6 Programme and Consumption Table

4.3.7 Auxiliary Function Selection

4.3.8 End Time

4.3.9 Starting the Programme

Instructions on how to initiate the selected washing programme.

4.3.10 Loading Door Lock

Information on the function and indication of the door lock.

4.3.11 Changing Selections During Operation

How to modify settings like auxiliary functions, speed, and temperature after starting.

4.3.11.3 Adding or Taking Out Laundry

4.3.12 Child Lock

How to activate and deactivate the child lock feature for safety.

4.3.13 Cancelling the Programme

Procedure for cancelling an ongoing washing programme.

4.3.14 End of Programme

Indication of programme completion and machine standby mode.

4.4 Maintenance and Cleaning

4.4.1 Cleaning the Detergent Drawer

Instructions for cleaning the detergent dispenser to prevent buildup.

4.4.2 Cleaning the Loading Door and the Drum

Steps for cleaning the drum and door seal to remove residues.

4.4.3 Cleaning the Body and Control Panel

How to clean the exterior of the machine and its control panel.

4.4.4 Cleaning the Water Intake Filters

4.4.5 Draining Water and Cleaning Pump Filter

Steps to drain residual water and clean the pump filter.

5 Troubleshooting

Programme and Operation Issues

Solutions for issues with starting, water filling, draining, and programme timing.

Performance and Noise Problems

Troubleshooting poor washing results, noise, vibration, and unpleasant odors.

Detergent, Foam, and Wet Laundry Issues

Resolving problems related to detergent use, foam, stiffness, and laundry remaining wet.

Related product manuals

Beko WMY 8736 XSX BTR

80 pages

Beko WMY 81243 PTLMB1

64 pages

Beko WMY 61283 CS PTLB2 User Manual

Table of Contents

Questions and Answers:

Beko WMY 61283 CS PTLB2 Specifications

Summary

General Safety Instructions

1.1 Life and Property Safety

1.2 Children's Safety

1.3 Electrical Safety

1.4 Hot Surface Safety

2 Important Instructions for Environment

2.1 Compliance with WEEE Directive

2.2 Package Information

3 Intended Use

4 Technical Specifications

4.1 Installation

4.1.1 Appropriate Installation Location

4.1.2 Removing Packaging Reinforcement

4.1.3 Removing the Transportation Locks

4.1.4 Connecting Water Supply

4.1.5 Connecting the Drain Hose to the Drain

4.1.6 Adjusting the Feet

4.1.7 Electrical Connection

4.1.8 Initial Use

4.2 Preparation

4.2.1 Sorting the Laundry

4.2.2 Preparing Laundry for Washing

4.2.3 Energy Saving Tips

4.2.4 Loading the Laundry

4.2.5 Correct Load Capacity

4.2.6 Using Detergent and Softener

Using Liquid Detergents

Using Gel and Tablet Detergent

Using Bleaches

4.2.7 Tips for Efficient Washing

4.3 Operating the Product

4.3.1 Control Panel Overview

4.3.2 Programme Selection

4.3.3 Programmes

4.3.4 Temperature Selection

4.3.5 Spin Speed Selection

4.3.6 Programme and Consumption Table

4.3.7 Auxiliary Function Selection

4.3.8 End Time

4.3.9 Starting the Programme

4.3.10 Loading Door Lock

4.3.11 Changing Selections During Operation

4.3.11.3 Adding or Taking Out Laundry

4.3.12 Child Lock

4.3.13 Cancelling the Programme

4.3.14 End of Programme

4.4 Maintenance and Cleaning

4.4.1 Cleaning the Detergent Drawer

4.4.2 Cleaning the Loading Door and the Drum

4.4.3 Cleaning the Body and Control Panel

4.4.4 Cleaning the Water Intake Filters

4.4.5 Draining Water and Cleaning Pump Filter

5 Troubleshooting

Programme and Operation Issues

Performance and Noise Problems

Detergent, Foam, and Wet Laundry Issues

Related product manuals