What to do if Beko WUE6511XWW does not drain water?
If your Beko Washer isn't draining water, the water drain hose might be clogged or twisted, so clean or flatten the hose. Also, the pump filter could be clogged, so clean the pump filter.
Why is my Beko WUE6511XWW vibrating or making noise?
If your Beko Washer is vibrating or making noise, first, adjust the feet to level the machine. A hard substance might have entered the pump filter, so clean it. Ensure the transportation safety bolts are removed. If the laundry quantity is too little, add more; if overloaded, take some out. Also, make sure the machine isn’t leaning on anything.
How to start program on Beko WUE6511XWW Washer after closing the door?
If the Beko Washer program doesn't start after you close the door, make sure you've pressed the Start / Pause / Cancel button. Also, if you've loaded too much laundry, it can be difficult to close the door properly. Reduce the amount of laundry and ensure the door is securely closed.
Why does laundry remain wet after washing in my Beko WUE6511XWW?
If your laundry remains wet at the end of the programme in your Beko Washer, excessive foam might have occurred and automatic foam absorption system might have been activated due to too much detergent usage, so use recommended amount of detergent.
Why doesn't my Beko WUE6511XWW Washer switch to spinning step?
If your Beko Washer doesn't switch to the spinning step, there might be unbalanced load in the machine, so automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the drum. The machine will not spin if water is not drained completely, so check the filter and the draining hose. Excessive foam might have occurred and automatic foam absorption system might have been activated due to too much detergent usage, so use recommended amount of detergent.
Why Beko Washer does not rinse well?
If it does not rinse well after washing with your Beko Washer, the amount, brand and storage conditions of the detergent used are inappropriate, so use a detergent appropriate for the washing machine and your laundry and keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures. Detergent is put in the wrong compartment, so if detergent is put in the prewash compartment although prewash cycle is not selected, machine can take this detergent during rinsing or softener step, so put the detergent in the correct compartment. The pump filter is clogged, so check the filter. The drain hose is folded, so check the drain hose.
Why is my Beko Washer not filling with water?
If your Beko Washer isn't filling with water, first, turn on the taps. If the water inlet hose is bent, flatten it. If the water inlet filter is clogged, clean the filter. Lastly, ensure the loading door is closed.
Why is my Beko Washer leaking from the bottom?
If your Beko Washer is leaking water from the bottom, the water drain hose might be clogged or twisted, so clean or flatten the hose. Also, the pump filter could be clogged, so clean the pump filter.
How to open the loading door of Beko WUE6511XWW Washer?
If the loading door of your Beko Washer cannot be opened, it may be due to the door lock being activated because of the water level in the machine. Drain the water by running the Pump or Spin programme. The machine may be heating up the water or it is at the spinning cycle, so wait until the programme completes. If the child lock is engaged, wait a couple of minutes for deactivation of the door lock. The loading door may be stuck because of the pressure it is subjected to, so grab the handle and push and pull the loading door to release and open it.
General| Door type | Tempered glass |
|---|---|
| Drum type | Aquawave |
| Door hinge | Left |
| Control type | Buttons, Rotary, Touch |
| Display type | LED |
| Door opening | Side opening |
| Loading type | Front-load |
| Product color | White |
| Built-in display | Yes |
| Door opening angle | 170 ° |
| Appliance placement | Freestanding |
| Self-cleaning | - |
| Current | 10 A |
| Connected load | 1550 W |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Energy efficiency scale | A to G |
| Power consumption (off) | 0.5 W |
| Power consumption (standby) | 1 W |
| Water consumption per cycle | 43 L |
| Energy consumption washing per cycle | 0.73 kWh |
| Drum capacity | 6 kg |
| Menu languages | English |
| Cycle time (max) | 197 min |
| Delay start (max) | 9 h |
| Residual moisture | 62 % |
| Spin-drying class | C |
| Maximum spin speed | 1000 RPM |
| Minimum spin speed | 400 RPM |
| Noise level (spin) | 72 dB |
| Noise level (wash) | 60 dB |
| Number of washing programs | 15 |
| Maximum washing temperature | 90 °C |
Weight and Dimensions| Depth | 440 mm |
|---|---|
| Width | 600 mm |
| Height | 840 mm |
| Weight | 55000 g |
Safety instructions to prevent injuries and material damage related to product usage.
Guidelines for safe use by children and precautions for child safety.
Precautions regarding electrical connections, grounding, and handling of the power cable.
Instructions on how to remove transportation safety bolts before operating the machine.
Detailed steps for connecting the water supply hose and relevant precautions.
Instructions for correctly connecting the drain hose to a waste outlet at the specified height.
Guidelines for safely connecting the washing machine to the electrical supply, including grounding.
Detailed instructions on how to use detergent, softener, and other cleaning agents correctly.
Specific instructions for using different types of detergents and cleaning agents.
Explanation of the washing machine's control panel, buttons, and indicators.
Table detailing wash programs, load capacities, durations, and consumption figures.
Instructions on how to set a delayed start and manage program timing.
How to drain remaining water from the machine and clean the pump filter.
Solutions for problems preventing the program from starting or being selected.
To Next Page
