EasyManua.ls Logo

Belarus 1221B.2 - Page 67

Belarus 1221B.2
295 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BELARUS-1221.2/1221В.2/1221.3 Operating controls and instruments
66
The seat Grammer MSG85/721
(if installed)
Important! Prior to beginning the opera-
tion of the tractor, adjust the seat to the
position being the most con
venient for
you. Perform all the adjust
ments while
sitting on the seat.
Seat adjustments:
According to the driver's weight with-
in the range from 50 to 130 kg with the
mass indication every 10 kg. Carried
out by the lever (1). To adjust the seat to
the bigger weight turn the handle clock-
wise, to adjust the seat to the lower
weight turn the handle contraclockwise.
Adjustment of back inclination from -
10° до 35°.
Carried out by the lever (2). Lift the lever
upwards to the stop, move the back and
release the lever. The back is fixed in the
necessary position.
Longitudinal seat adjustment within
the range of 150 mm.
Carried out by the lever (3). To move
the seat forward/backward pull the lever
upwards, move the seat and release the
lever. The seat is automatically fixed in
the necessary position.
Height adjustment within the range of
60 mm. The seat has three height posi-
tions “lower”, “middle” and “upper”. To
move the seat from the “lower” position
to the “middle” one or from the “middle”
position to the “upper” one smoothly lift
the seat upwards to the clickwork (the
indicator click sounds). To move seat
from the “upper” position to the “lower”
one move the seat sharply upwards to
the stop and move down.
Note: It is not possible to move the
seat from the “middle” position to the
“lower” position.