7
Gigabit Powerline HD Networking Adapter
SECTIONS
Table of Contents
1 2 43
CONFIGURATION
Adding Another Adapter to the Network
1. If the default network password has been changed, a new Adapter
will have to load the new password before it can join the network.
2. Press the “Encryption” button on an encrypted unit for more than 1
second, but less than three seconds.
3. Within two minutes, press the “Encryption” button on the new unit
for more than 1 second, but less than three seconds.
4. The new device has now been loaded with the network password
and added to the current powerline network.
Resetting to Factory Defaults
Using a pointed object, press and hold the “Reset” button for one
second to restore defaults. This procedure resets the network password
to the default out-of-box value.
To Next Page
Loading...
