Belkin F5D8001 User Manual

2322
Using the Belkin Wireless Networking Utility
2322
Using the Belkin Wireless Networking Utility
Configuring your Card to use Security
At this point, you should already have your wireless router (or access
point) set to use WPA or WEP. In order for you to gain wireless
connection, you will need to set your N1 Wireless Desktop Card to
use the same security settings.
Changing the Wireless Security Settings
The Belkin N1 Wireless Desktop Card supports the latest WPA security
feature as well as the legacy WEP security standard. By default, wireless
security is disabled.
To enable security, you will first need to determine which standard is
used by the router (or access point). (See your wireless router’s or access
point’s manual for directions on how to access the security settings.)
To access the security settings on your Card, click the “My
Connections” tab and point to the connection for which you want
to change security settings. Click “Edit” to change settings.

Belkin F5D8001 Specifications

General

Brand	Belkin
Model	F5D8001
Category	Network Card
Language	English