Bell 206L-1 User Manual

Document Number
121-044-00
Page
6 of 15
Rev. 0
Bell 206L/407 Cargo Hook Kit
Rotorcraft Flight
Manual Supplement
FAA Approved
2. NORMAL PROCEDURES continued
2-3 Pre-flight Check continued
8. Move the cargo hook and the suspension system throughout
their full ranges of motion to ensure the manual release cable
and electrical harnesses have enough slack. The cable or
electrical harnesses must not be the stops that prevent the
cargo hook or suspension from moving freely in all directions.
9. Move the cargo hook back and forth on the suspension beam to
ensure that it rolls freely and that there are no obstructions
within the beam.
When an Onboard Systems 200-196-00 Cargo Hook Suspension
System with Load Weigh is installed, perform the following
additional procedure:
1. Zero the load weigh system or tare the weight on the cargo
hook that is not wanted, such as the weight of a cargo net or
long line, by depressing the zero button on the indicator.

Bell 206L-1 Specifications

General

Brand	Bell
Model	206L-1
Category	Toy
Language	English