EasyManuals Logo

Bell 206L-1 User Manual

Bell 206L-1
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Document Number
121-044-00
Page
7 of 15
Rev. 0
Bell 206L/407 Cargo Hook Kit
Rotorcraft Flight
Manual Supplement
FAA Approved
2. NORMAL PROCEDURES continued
Cargo Hook Rigging
Extreme care must be exercised in rigging a load to the Cargo
Hook. If the load ring is too big it may work its way around the
end of the load beam and be supported for a time on the keeper
and then fall free. If the load ring is too small it may jam itself
against the load beam during an attempted release.
The following illustrations show recommended rigging
configurations and potential difficulties that must be avoided.
The examples shown on the following pages
are not intended to represent all problem
possibilities. It is the responsibility of the
operator to ensure that the cargo hook will
function properly with the rigging.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bell 206L-1 and is the answer not in the manual?

Bell 206L-1 Specifications

General IconGeneral
BrandBell
Model206L-1
CategoryToy
LanguageEnglish

Related product manuals