Need help?Do you have a question about the Bell Dashboard 100 and is the answer not in the manual?
General| Wireless | Yes |
|---|---|
| Water Resistant | Yes |
| Battery Life | Up to 1 year |
| Material | Plastic |
| Color | Black |
| Type | Bike Computer |
| Display | Digital |
| Features | Speed, Distance, Trip Time, Clock |
| Mounting Type | Handlebar |
| Compatibility | Universal |
Instructions for installing the computer battery with correct polarity.
Guide for clamping the magnet to the front wheel spoke, ensuring correct orientation.
Steps to attach the computer sensor to the right fork leg using cable ties.
Procedure for attaching the mounting bracket to the handlebar and inserting the computer.
Procedure to set the correct 4-digit wheel value based on tire size for accurate readings.
Instructions for choosing between kilometer and mile units for speed and distance.
Guide to setting the clock in either 12-hour or 24-hour format.
Verification step to ensure the computer is programmed and functioning after installation.
Displays total distance traveled; can be reset by buttons or battery removal.
Shows trip distance, automatically activated during riding, resettable to zero.
Records and displays the highest speed achieved during a ride.
Calculates and displays average speed, working with the Trip Timer.
Measures time spent actively riding during a trip.
Automatically cycles through DST, MXS, AVS, and TM readings on the screen.
Conserves battery by automatically switching off when unused and reactivating with input.
Displays instantaneous speed within a specified range and accuracy.
Indicates if current speed is faster (+) or slower (-) than average speed.
Visual indicator showing acceleration (wheel forward) or deceleration (wheel backward).
Addresses issues like interference, improper alignment, or battery problems.
Troubleshooting for slow response, often related to battery contact or temperature.
Solutions for erratic display behavior, usually due to battery or temperature extremes.
Resolves issues of a blank screen, typically caused by overheating or damage.
Fixes for missing trip distance data, usually due to sensor/magnet misalignment.
To Next Page
