Bell Console 300 User Manual

console 300
16-FUNCTION WIRELESS CYCLE COMPUTER

Bell Console 300 Specifications

General

Brand	Bell
Model	Console 300
Category	Bicycle Accessories
Language	English

Summary

Step 1: Install Batteries

Step 2: Install Computer Bracket

Step 3: Install Computer Sensor

Step 4: Install Magnet

Step 5: Fine Tune Magnet/Sensor Positioning

Programming the Bell Console 300

Set the Wheel Value

Determine and input the correct 4-digit wheel value based on tire size for accurate measurements.

Set KM or Mile Selection

Choose between kilometer or mile units for distance and speed readings.

Input Age and Weight

Enter user's age and weight for more accurate calorie and fat burn calculations.

Set Distance for Maintenance Reminder

Configure the interval for the maintenance reminder wrench icon.

Set the Clock

Test to Ensure Proper Installation

Troubleshooting Common Issues

No Speedometer Display or Data

Addresses issues like interference or improper sensor/magnet alignment.

Slow or Irregular Display Response

Solutions for slow performance or erratic display due to battery or temperature.

Black Display

Troubleshooting steps for a black screen, possibly due to heat or damage.

No Trip Distance Reading

Recommends checking sensor and magnet alignment for trip distance issues.

Speed Function Shuts Off

Addresses speed function cutoff by checking sensor/magnet spacing.