troubleshooting
PROBLEM
No speedometer
display and/or no
data reading
Slow display
response
Display shows
irregular features
Black display
POSSIBLE CAUSE
Possible interference from electrical sources
Improper magnet/sensor alignment
Poor battery contact or low/dead battery
Temperature outside of operational
limits (0-60°C or 32-140°F)
Poor battery contact or low/dead battery
Temperature too hot or display exposed
to sunlight too long
Computer damaged or dropped
RECOMMENDED ACTION
Move computer to different area
Ensure speedometer sensor and magnet are
properly installed and aligned (STEP 5)
Replace Battery
Only use computer when temperature is
within operational limits
Replace battery
Only use computer when temperature is within
operational limits. Remove from sunlight
Computer is broken
No trip distance
reading
Improper sensor/magnet alignment Ensure proper alignment
Speed function shuts
off after reaching a
certain speed
Wheel ex creating too much space
between sensor and magnet.
Check sensor and magnet for tightness.
Reduce space between sensor and magnet
slightly (<3mm).
To Next Page
Loading...
Need help?
General
