How to fix no speedometer reading on Bell Bicycle Accessories?
If your Bell Bicycle Accessories speedometer isn't showing any reading, it might be due to incorrect alignment between the magnet and the sensor. To resolve this, check and ensure that the sensor and magnet are correctly aligned.
What to do if Bell Dashboard 300 indicates inaccurate value?
If your Bell Bicycle Accessories are showing inaccurate values, it's possible that there was an improper input, such as the wheel circumference. To correct this, double-check and re-enter the wheel circumference value.
Why is the display on my Bell Dashboard 300 black?
If the display on your Bell Bicycle Accessories is black, it could be due to the temperature being too high, or because it was placed in direct sunlight. To fix this, cover the device and allow it to cool down.
What to do if Bell Bicycle Accessories display response is slow?
A slow display response on your Bell Bicycle Accessories might be caused by the temperature exceeding the operating limits (0°C~55°C). In this case, cover the device and allow it to cool down.
General| Water Resistant | Yes |
|---|---|
| Material | Plastic |
| Color | Black |
| Type | Bike Computer |
| Wireless | Yes |
| Features | Speed, Distance, Ride Time, Clock |
| Mount Type | Handlebar |
| Compatibility | Universal |
Crucial safety advice regarding improper installation and potential accidents.
Procedure for installing the computer's battery correctly.
Steps for attaching the magnet to the front wheel spoke.
Mounting the speed sensor onto the bicycle fork.
Entering the correct wheel circumference for accurate measurement.
Choosing between kilometers or miles for unit display.
Inputting personal data for calorie calculations.
Configuring the interval for bicycle maintenance alerts.
Setting the current time on the cycle computer.
Verifying correct installation and data recording after setup.
Displaying total distance traveled and how to reset it.
Tracking distance for individual trips and resetting the trip meter.
Viewing and resetting the maximum speed recorded.
Calculating and displaying average speed for a trip.
Recording and displaying time spent actively riding.
Measuring and displaying outdoor temperature in Celsius or Fahrenheit.
Estimating calories burned based on user input and ride data.
Estimating fat grams burned based on user input and ride data.
Automatically rotating through various data displays without button presses.
Locking the display at the end of a ride segment for later review.
Preserving total distance data even after battery replacement.
Automatic power-off to conserve battery when idle.
Displaying instantaneous speed with accuracy details.
Indicating if current speed is faster or slower than average.
Visual indicator for acceleration or deceleration.
Activating the screen backlight for low-light visibility.
To Next Page
