Bell Dashboard 300 User Manual

troubleshooting
12
PROBLEM
No speedometer
display and/or no
data reading
Slow display
response
Display shows
irregular features
Black display
POSSIBLE CAUSE
Possible interference from electrical sources
Improper magnet/sensor alignment
Poor battery contact or low/dead battery
Temperature outside of operational
limits (0-60°C or 32-140°F)
Poor battery contact or low/dead battery
Temperature too hot or display exposed
to sunlight too long
Computer damaged or dropped
RECOMMENDED ACTION
Move computer to different area
Ensure speedometer sensor and magnet
are properly installed and aligned (p.3)
Replace Battery
Only use computer when temperature is
within operational limits
Replace battery
Only use computer when temperature is
within operational limits. Remove from
sunlight
Computer is broken
No trip distance
reading
Improper sensor/magnet alignment Ensure proper alignment

Bell Dashboard 300 Specifications

General

Brand	Bell
Model	Dashboard 300
Category	Bicycle Accessories
Language	English