additional function modes
7
ODOMETER (ODO)– Total distance traveled is indicated by “ODO” and displayed
on the bottom line. To reset ODO, press both RIGHT and LEFT buttons for 3 seconds
or remove and replace the battery. Now press the RIGHT button to advance to the
DST mode.
TRIP METER (DST)– Trip distance is indicated by DST and is displayed on the
bottom line. The Trip Meter is activated automatically with speedometer input (comes
on automatically when you begin riding, turns off when you stop). To reset DST to zero,
press and hold the RIGHT and LEFT buttons for 3 seconds. Note that TM (Trip Time)
& AVS (Average Speed) will also be reset at that time. Now press the RIGHT button to
advance to the MXS mode.
MAXIMUM SPEED (MXS)– Maximum speed is indicated by MXS and is displayed
on the bottom line. Maximum speed is stored in memory and updates only when a
higher speed is reached. To reset MXS, press and hold the LEFT button for 3 seconds.
Now press RIGHT button to advance to Average Speed (AVS) mode.
To Next Page
Loading...
Need help?
General
