additional FunCtion modes
ODOMETER (ODO)– Total distance traveled is indicated by “ODO” and displayed
on the bottom line. To reset ODO, press the LEFT button for 2 seconds or remove and
replace the battery. Adjust each ashing digit by pressing the RIGHT button and then
press LEFT to conrm. Now press the RIGHT button to advance to the DST mode.
TRIP METER (DST)– Trip distance is indicated by DST and is displayed on the
bottom line. The Trip Meter is activated automatically with speedometer input (comes
on automatically when you begin riding, turns off when you stop). To reset DST to zero,
press and hold the LEFT button for 2 seconds. Note that TM (Trip Time) & AVS (Average
Speed) will also be reset at that time. Now press the RIGHT button to advance to the
MXS mode.
MAXIMUM SPEED (MXS)– Maximum speed is indicated by MXS and is displayed
on the bottom line. Maximum speed is stored in memory and updates only when a
higher speed is reached. To reset MXS, press and hold the LEFT button for 2 seconds.
Now press the RIGHT button to advance to the Average Speed (AVS) mode.
To Next Page
Loading...
Need help?
General
