EasyManua.ls Logo

Belling 152 - Cooker Setup and Levelling; Adjusting Cooker Levelling Feet

Belling 152
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation Instructions
Unpack the components from inside the grill and oven: Check
that the following parts are present.
Grill pan and grid
Pan supports (3)
Main oven shelves (4)
Meat pan
Literature
Griddle
Two rear wheels and two front feet are fitted which can be adjust-
ed up or down to set the height (900mm - 915mm) and level the
cooker.
1. The rear wheels can be raised or lowered from the BACK of the
cooker by adjusting the levelling screws ā€˜A’ in the plinth.
2. The front feet can be simply screwed in or out to lower or raise
the front of the cooker.
Some soft floor coverings may get damaged if the cooker is not
moved carefully.
7
UNPACKING
THE COOKER
LEVELLING
CAUTION:
VIEWED FROM THE REAR

Related product manuals