Cooktop issues (continued)
Ignitor keeps clicking:
It is most likely some moisture has entered the ignition switches
under the knobs. This may be from spillage or when cleaning with
liquids. Turn off the cooktop at the power point and allow 24-48
hours for it to dry out before switching it back on.
Note: Water will dry out. Oil will take much longer or may not dry
out at all.
All burners spark when trying to light one:
This is normal. The ignition for all the burners is linked. A burner
will only light when you turn the knob, providing it with gas.
If required, please call the Belling Technical Department on 09
274 8265
Installation
27
To Next Page
Loading...
