INSTALLATION
Beforeyoustart:Pleasereadtheinstruc-
tions. Planning your installation will save
you time and effort.
Prior to installation, ensure that the local
distribution conditions (nature of the gas
and gas pressure) and the adjustment of
the appliance are compatible. The adjust-
ment conditions are stated on the data
badge.
This appliance is not connected to a com-
bustion evacuation device. It shall be in-
stalled and connected in accordance with
current installation regulation. Particular
attention shall be given to the relevant
requirementsregardingventilation.
The information below is crucial to install-
ing this appliance correctly and safely.
Failure to install appliances cor-
rectly is dangerous and could lead to
prosecution.
Ventilation Requirements
VentilationmustbeasspeciedbyAS
5601 Installation code. The room con-
taining the appliance should have an air
supply.
An appliance should be installed in a
location for complete combustion of gas,
properueingandtomaintainambient
temperature of the immediate surround-
ing at safe limits, under normal condi-
tions.
Failure to install appliances cor-
rectly is dangerous and could lead to
prosecution.
WARNING! - This appliance is un-
suitable for use in a marine environ-
ment.
If the appliance is placed on a base,
measures have to be taken to prevent it
slipping from the base.
Caution:Theuseofgascookingappli-
ance results in the production of heat,
moisure and products of combustion in
the room in which it was installed. Ensure
that the kitchen is well ventilated espe-
ciallywhentheapplianceisinuse:keep
natural ventilation holes open or install a
mechanical ventilation device (mechanical
extractor hood).
Gas Safety (Installation & Use)
Regulations
This appliance must by an authorised
person in accordance with the Austra-
lian Gas Installation Standard AS5601
the manufacturers installation instruc-
tions,localgasttingregulations,and
any other relevant statutory regula-
tions.
Particular attention should be given
torelevantrequirementsregarding
ventilation.