Belling BI45COMW - Appliance Troubleshooting; Display and Touch Sensor Issues; Cooking Program Start Problems; Noise and Arcing Troubleshooting

Troubleshooting.
Some basic issues can be resolved without the need to request a service visit. For other issues, or if the issue remains
after following this advice, please request a service visit.
Issue:
Possible Cause:
Resolution:
The display screen is blank.
No power to the appliance.
Please check that the oven is
switched on at the fused spur
cooker point.
Please check that the circuit switch
has not tripped down at the
fusebox.
The touch sensors do not respond.
The childlock function may be
active.
There may be a film of water or
grease on the control panel.
Please deactivate the childlock
function.
Please wipe the control panel clean.
The cooking programme can be
selected, but cooking does not start.
The door may not be closed
correctly.
Please check that the door is closed
correctly; that the door and seal are
clean; and that nothing is trapped
between the door and the oven.
Strange noises and/or arcing.
Metal cookware may have been
used by mistake.
Metal items or aluminium foil may
have touched the wall of the oven
cavity.
The glass turntable and/or roller
ring may not be positioned
correctly.
Use cookware suitable for
microwave ovens.
Always allow a gap of at least 3cm
between the cookware and the
walls of the oven cavity.
Position the glass turntable and
roller ring correctly.
The microwave does not heat or the
food cooks slowly in microwave
mode.
Metal cookware may have been
used by mistake.
Has the correct microwave power
level and cooking duration time
been selected?
Is the quantity of food too large?
Has the showroom demonstration
mode been activated in error?
Use cookware suitable for
microwave ovens.
Select the correct microwave power
level and cooking duration time.
Two smaller portions will cook more
quickly than one large portion.
Deactivate the showroom mode.
The sound of a fan continues to run
at the end of the cooking duration
time.
This is the sound of the cooling fan
running on for a while to cool the
appliance down.
This is normal.
The oven lamp does not work.
No power to the appliance.
Please check that the oven is
switched on at the fused spur
cooker point.