Bellini BECF40 - How to Assemble Your Chocolate Fountain; Assembly of the Tower; Assembly of the Fountain

6
How to Assemble Your Chocolate Fountain
Assembly of the Tower
1. Hold the Tower piece upright and slide the
Lower Tier onto the lower groove.
2. Repeat the above with the Upper Tier.
3. Place the Top Tier Cover on the top of the
Tower. To fit into place you will need to twist
the Cover until it locks firmly into position.
H
EA
T
/F
L
OW
H
EA
T
O
F
F
4. Tower
H
EA
T
/F
L
OW
H
EA
T
O
F
F
5. Auger
Base
Motor Base Pin
Guiding Pins
H
EA
T
/F
L
OW
H
EA
T
O
F
F
H
EA
T
/F
L
OW
H
EA
T
O
F
F
3. Lower Tier1. Top Tier
Cover
2. Upper
Tier
H
EA
T
/F
L
OW
H
EA
T
O
F
F
H
EA
T
/F
L
OW
H
EA
T
O
F
F
Assembly of the
Fountain
1. Place the base on a firm, level surface.
2. Put the Auger onto the Motor Base Pin. The
triangular slot will fit tightly over the Motor
Base Pin.
3. Place the assembled Tower over the Auger
and fit onto the Guiding Pins.
3. Always ensure your Chocolate Fountain is
perfectly level. This is very important as the
Fountain must be level to ensure the chocolate
flow is even and flowing consistently. It may be
helpful to use a spirit level for this purpose.