5
Before Using the
Appliance for the First
Time
• Before using the appliance for the first time,
carefully unpack the Chocolate Fountain and
remove all the packaging material. Wipe the
body of the Chocolate Fountain with a soft dry
or damp sponge or cloth. Wash the Auger and
the Tower sections in warm soapy water, rinse
then dry.
• After cleaning, allow all parts to dry completely
before assembly. For detailed instructions
about assembling your Chocolate Fountain,
please refer to page 6.
• Return the Auger to the base making sure
it is securely in place by aligning the groove
on the bottom of the Auger to the motor base
pin. Make sure it is secured and locked into
position. Do not attempt to place the Auger
or the Tower on the Base or remove from
the Base while the motor is on. Make sure
the Tower is fitted on the posts on the base
properly.
To Next Page
Loading...
