EasyManua.ls Logo

Bellini BPD270EC - Page 32

Bellini BPD270EC
39 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To unlock
1. Make sure the ceramic hob is turned on.
2. Touch and hold the child lock key for a while.
3. You can now start using your ceramic hob.
When the hob is in the lock mode, all the controls are disable except for the ON/OFF, you can always
turn the ceramic hob off with the ON/OFF control in an emergency, but you shall unlock the hob first in
the next operation
Over-Temperature Protection
A temperature sensor equipped can monitor the temperature inside the ceramic hob. When an excessive
temperature is monitored, the ceramic hob will stop operation automatically.
Residual Heat Warning
When the hob has been operating for some time, there will be some residual heat. The letter “H”appears to warn
you to keep away from it.
Auto Shutdown
Another safety feature of the hob is auto shutdown. This occurs whenever you forget to switch off a cooking zone.
The default shutdown times are shown in the table below:
Power level
1
2
3
4
5
6
7
8
9
Default working timer (hour)
8
8
8
4
4
4
2
2
2
Using the Timer
You can use the timer in two different ways:
You can use it as a minute minder. In this case, the timer will not turn any cooking zone off when the set time is up.
You can set it to turn all the cooking zone off after the set time is up.
You can set the timer for up to 99 minutes.
Using the Timer as a Minute Minder
If you are not selecting any cooking zone
1. Make sure the cooktop is turned on.
Note: you can use the minute minder even if you’re not selecting any cooking zones.
2. Touch the timer control, the timer indicator show “--
3. Adjust the timer setting by touch the “-“ or “+”
c
ontrol. The minute minder indicator will start
flashing and will show in the timer display.
Hint: Touch the “-“ or “+” control of the timer
o
nce to decrease or increase by 1 minute.
Touch and hold the or control of the timer to
decrease or increase by 10 minutes.
If the setting time exceeds 99 minutes, the timer will automatically return to 0 minute.
11

Related product manuals