5. When the time is set, it will begin to count
down immediately. The display will show the
remaining time and the timer indicator flash
for 5 seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
Setting the timer to turn more than one cooking zone off
1. If more than one heating zone use this function, the timer indicator will show the lowest time.
(e.g. zone 1# setting time of 5 minutes, zone 2# setting time of 15 minutes, the timer indicator shows “5”.)
NOTE: The red dot next to power level indicator will flash。
(set to 15 minutes)
(set to 5 minutes)
2. Once the countdown timer expires, the corresponding zone will switch off. Then it will show the new min. timer and the
dot of corresponding zone will flash.
3. When cooking timer expires, the corresponding
cooking zone will be switch off automatically.
NOTE: If you want to change the time after the timer is set, you have to start from step 1
To Next Page
Loading...
