17
1 32
Filling the Rinse Aid Reservoir
1. Remove the rinse reservoir cap by rotating it counter clockwise.
2. Carefully pour in the rinse aid into the dispenser, whilst avoiding it to overflowl.
3. Close the rinse aid reservoir cap by rotating it clockwise.
Do not overfill the rinse aid dispenser.
Clean up any spilled rinse aid with an absorbent cloth to avoid excessive foaming during the next wash.
Adjusting the Rinse Aid Reservoir
Turn the rinse aid indicator dial to a number
between 1 and 6. The higher the number, the more
rinse aid the dishwasher uses. If the dishes are not
drying properly or are spotted, adjust the dial to the
next higher number until your dishes are spot-free.
Reduce it if there are sticky whitish stains on your
dishes or a bluish film on glassware or knife blades.
OPERATION
To Next Page
Loading...