Using your hearing aids
Turning your hearing aids on and off
1. To turn on: Press and hold the button for 5seconds
2. To turn off: Press and hold the button for 5seconds
When the hearing aid turns on, the green LEDlights up. When the hearing aid turns off, the green LED flashes
3times.
Your hearing aids also turn off automatically when you place them in the charger (while it is active), and they turn
on automatically when you remove them from the charger.
Your hearing aids always start in program1 at the pre-set volume.
Delayed Activation
Delayed Activation delays the time before your hearing aid turns on after you remove the hearing aid from the
charger. With this function activated, you will hear a beep for each second of the delay period (either 5 or 10
seconds).
NOTE: If you do not want to use this function, ask your hearing care professional to deactivate it.
The push button
The push button gives access to the features that your hearing care professional and you decide to apply to your
hearing aids. Per default, the push button allows you to use up to four different listening programs, and three
18 Using your hearing aids
To Next Page
Loading...
Need help?
General
