What to do if my Beltone Rely 64 has no sound?
If your Beltone Hearing Aid has no sound, first ensure that it is turned on. Next, check if there's a battery inside and if it's still good; if not, insert or replace it with a new battery. If these steps don't resolve the issue, earwax buildup may be the cause, so visit your physician.
How to prevent my Beltone Hearing Aid battery from draining quickly?
To prevent your Beltone Hearing Aid battery from draining quickly, always turn off your hearing aids when you are not using them, such as during the night. Also, check the battery packaging to ensure the battery isn't old.
How to extend Beltone Rely 64 Hearing Aid battery life?
If the battery in your Beltone Hearing Aid drains very quickly, make sure you turn off your hearing aid when you are not using it, such as at night. Also, check the battery packaging to make sure the battery isn't old. Remember that batteries will run out faster when you use wireless functions like streaming from your smart device or from your TV with our TV streamer.
Why does my Beltone Rely 64 have feedback or "whistling"?
Feedback or whistling can occur for several reasons. It might be because your earmold or dome isn't correctly inserted—try re-inserting it. If the volume is too high, reduce it. Also, holding objects too close to the hearing aid can cause feedback, so create more space. Finally, earwax buildup can be a cause, in which case, visit your physician.
Why is the sound distorted, spluttering, or weak in my Beltone Rely 64?
Distorted, spluttering, or weak sound in your Beltone Hearing Aid can stem from several issues. First, check the battery; if it's dead or dirty, replace or clean it. Another potential cause is moisture inside the hearing aid; try using a desiccant (drying kit) to remove any moisture.
Why is my Beltone Rely 64 Hearing Aid whistling or has feedback?
If your Beltone Hearing Aid is producing feedback or a whistling sound, ensure your earmold or dome is correctly inserted. If the volume is too loud, reduce it. Also, avoid holding objects close to the hearing aid. If the problem persists, your ear may be full of wax, or the receiver wire might be broken or the earmold clogged, so you should visit your doctor or hearing care professional.
Why does my Beltone Rely 64 sound distorted, weak, or is spluttering?
If the sound from your Beltone Hearing Aid is distorted, spluttering, or weak, the first step is to replace the battery. If that doesn't work, the battery may be dirty, so try cleaning it or replacing it with a new one. If there is moisture in your hearing aid, use a desiccant (drying kit). If the problem persists, the receiver wire might be broken or the earmold clogged, so you should consult your hearing care professional.
General| Category | Hearing Aid |
|---|---|
| Manufacturer | Beltone |
| Model | Rely 64 |
| Type | Behind-the-ear (BTE) |
| Technology | Digital |
| Channels | 16 |
| Gain | 64 dB |
| Water Resistance | IP68 |
| Wireless Connectivity | Bluetooth |
| Feedback Cancellation | Yes |
| Noise Reduction | Yes |
| Directional Microphones | Yes |
| Battery Type | Size 13 |
To Next Page