EasyManua.ls Logo

Beltone ALLY - User Manual

Beltone ALLY
76 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Instructions for use
Digital Receiver In-the-Ear (RIE)
Hearing Instruments
Legend and Ally

Table of Contents

Questions and Answers

  • S
    stephen71Aug 10, 2025
    Why is my Beltone ALLY not working?
    • M
      Mary PetersonAug 11, 2025
      If your Beltone Hearing Aid is not working, there are several potential causes. First, ensure that the device is turned on. If it is still not working, the battery may be dead and needs replacing. Also, check that the battery is correctly inserted. If the issue persists, the receiver or receiver tube might be broken, requiring repair or replacement. Finally, a blocked wax guard filter could be the culprit; try clearing it.
  • P
    Patricia WalshAug 25, 2025
    Why is my Beltone Hearing Aid not loud enough?
    • D
      Dustin McguireAug 25, 2025
      If your Beltone Hearing Aid isn't loud enough, consider these possible reasons. Ensure the receiver dome is properly inserted. A blocked wax guard filter can also reduce the volume, so try clearing it. If you've experienced a change in hearing, consult a hearing professional. Excessive ear wax could also be the cause, so remove any excess. Finally, the hearing instrument settings might not be optimal; try adjusting them.

Beltone ALLY Specifications

General IconGeneral
BrandBeltone
ModelALLY
CategoryHearing Aid
LanguageEnglish

Related product manuals